New Socket to Replace LGA1366 in 2011

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
According to the folks at Bit-Tech, Intel has plans to introduce a new socket in the third quarter of 2011. Not much information is given beyond that except the new socket will not be compatible with current processors.

Our sources in Taiwan also told us that the new chipset that will accompany this socket - inevitably being called "X68", although this is far from being an official name - will feature four DDR3 DIMM channels. It will only support one DIMM per channel as this maximises memory bandwidth, but memory density will be overall lower than current LGA1366, Core i7 systems as there will only be four sockets versus the six you see on current X58 boards.
 
and there we go... just about when 980 gets affordable here comes something new again.. that's why many didn't buy into 1156 as it was a dead end.
 
*puts money back in wallet* Looks like I need to wait for that CPU upgrade i was planning. Else stick with AMD and get their new 6 Core when it's available.

Shane
 
And I was going to do my new build in the fall/winter. :eek: Seems like they make a new socket every year or two.
 
Hah. So they went dual channel, triple channel, dual channel (1156), 4chan!
 
Meh, I change sockets like I change underpants. ALL the time. It's fun. Sticking to one socket is like sticking to one pair of boobies....no wait...;)
 
Hahaha... So if I read the caption right... It's 4 slots and each slot counts as a channel? Effectively giving us four channel without the need for two sticks per channel?

I see this as awesome yet I'm a bit saddened, I like being able to sleep at night knowing the my system has more RAM then I am capable of using. :p
 
Since we have only seen increased speed and an extreme edition 6 core chip I thought 1366 would have a lot more life to. Hopefully we get some reasonably priced 6 core chips before the socket is phased out.

Sucks for the motherboard makers because no one is going to buy X58 boards with USB 3 & SATA 6.
 
You'll be saying that forever the way technology is. i7 is a great processor and will be for awhile. ;)

so are the C2Q's :) but I was going to upgrade to an i7 setup this summer anyway, being the geek that I am. I might as well wait now though
 
Is socket changing the equivalent of a cock block? Because if it is, Intel just did it.
 
We had 775 for how long? Almost a decade.

And yet even then, there was much incompatibility between all the chipsets in that socket.

The later Pentium 4's used LGA 775 but you couldn't slap a Core 2 Quad in them.
 
Could bring the insanely high cost of the 980x down for us too cheap to plunk down a grand, now. Those early adopters willing to spend that kinda cash will want to dump their crappy 980x and I'll pick it up at a more affordable cost of say....$400...wait thats still too much.
 
If I could pickup a 980x in Q2 2011 for around $500 bucks I would jump on it. Plus 12GB's of ram I think the X58 chipset would useful for quite sometime.
 
I was looking at either LGA1366 or 1156, as 2011 falls within my 3 year upgrade plan. Time to watch and see what happens now.
 
At least with AMD they're not changing to a different incompatible socket every year.
 
We had 775 for how long? Almost a decade.

Late 2005/Early 2006? The later gen Pentium 4's were the first to use it. The desktop Core 2 Duo's came out in mid 2006.

The thing that annoys me is figuring out which intel chipsets are compatible with which processers/RAM.

It seems easier on the AMD side. You just have to check for BIOS compatibility if you use a newer gen CPU in an older mobo (AM3 CPU in an AM2+ motherboard or whatever). AM2/AM2+ use DDR2 RAM, AM3 supports DDR3.
 
Meh, I change sockets like I change underpants. ALL the time. It's fun. Sticking to one socket is like sticking to one pair of boobies....no wait...;)

That's fine if you don't use third-party cooling. I've kept my TRUE (s775) and been waiting for more than 4 months for the s1156 adapter. Yes, I got this 750 for OC and been running it stock :(

I was planning to go i7/s1366. Now for the first time in years I'm considering AMD for the gaming rig. *sigh*
 
Guess I'll be sticking to my 775 rig for a little while longer. It's still chugging away at everything fine.
 
So here's what I bet we get:

8 Cores (Octo core lol)
Quad channel DDR3 (of course it already says this)
X68 chipset (of course)
ICH11 southbridge supporting USB3 and SATA3
 
So here's what I bet we get:

8 Cores (Octo core lol)
Quad channel DDR3 (of course it already says this)
X68 chipset (of course)
ICH11 southbridge supporting USB3 and SATA3

I don't think USB3 is going into this refresh, maybe the next.
 
Whatever socket it maybe. It will probably be powering my next rig. Looking for a slight boost in performance and good thermals. My rig wants to be dead silent!
 
I don't see what the entire fuss is about. I've upgraded my motherboard and ram everytime I upgraded my CPU. Even if its the same socket, in the 1-2 years that pass between CPU upgrades, so many advances have been made in MB tech it would be a waste to put a new cpu into an old board. I can tell you my EP45-UD3R that I got for my Q6700 is a far better mobo than my 965P-DS3 I had with my E6600. Same socket but the 2 boards dont even compare in quality and features.

I dont know, just seems to me that putting a new CPU into a 2 year old motherboard is just asking to cripple yourself, especially if you overclock.
 
i have been through 2 775 setups, 2 1156 setups, and now im using a 1366 setup, all in the past year. its fun to do a new build! however, i dont see a point to upgrading to this new socket. NOTHING can max out a 920 at 4GHz right now, and with 12gb for cheap or up to 24GB if you got the cash, i dont see why youd want to double the cost of your computer for such little, and unusable, returns. its like buying SLI GTX480s. :rolleyes: good for the e-peen, but thats about it.
 
i have been through 2 775 setups, 2 1156 setups, and now im using a 1366 setup, all in the past year. its fun to do a new build! however, i dont see a point to upgrading to this new socket. NOTHING can max out a 920 at 4GHz right now, and with 12gb for cheap or up to 24GB if you got the cash, i dont see why youd want to double the cost of your computer for such little, and unusable, returns. its like buying SLI GTX480s. :rolleyes: good for the e-peen, but thats about it.

Go go 5x1 30" gaming setup.
 
like everyone else in this post I was waiting to get an i7, might as well wait now. Intel seems to have a nice history of constantly changing the socket to screw over their customers. Sigh, might as well wait another year and see if my Q6600 will last me that long. If not, AMD will have my money since they have kept socket compatibility!
 
Having 2 sockets to begin with is stupid for the i3-i7 series. Hopefully this new socket will completely replace what they have now. One home, one server, there's no need for more than that.
 
like everyone else in this post I was waiting to get an i7, might as well wait now. Intel seems to have a nice history of constantly changing the socket to screw over their customers. Sigh, might as well wait another year and see if my Q6600 will last me that long. If not, AMD will have my money since they have kept socket compatibility!

Never really understood this attitude. It has consistently been best to buy the new generation intel processors very shortly after they come out. They're not expensive and it takes them a long time to depreciate. By waiting you actually make it more expensive per month used. The only benefit to waiting is that motherboards with a new socket can be ripoffs for a while.
 
Unless it supports that 48-core monster, I'll stick with my socket 1366 upgrade plan (my Pentium D 820 rig has seen better days).
 
Socket 775's been around for less than six years. AM2+ is three years old.

I took pleasure in reading this news item, because I have already seen staunch Intel defenders known for defending their poor dollar-performance Intel purchases complain about it.

I'll be over here putting a $299 six-core into a DDR2 motherboard, making photoshops of Intel laughing all the way to the bank.
 
If you check out this page http://en.wikipedia.org/wiki/CPU_Sockets you can see that throughtout the past 20 years or so, there have been many different CPU sockets/slots, so it shouldn't be of any surprise that this trend will continue. Some sockets have lasted longer than normal, like Socket 775, 478, 462/A. AM2, while others were hardly around to remember such as Socket 423, 754 and 939. Judging from history, I don't think any of us should expect a socket to last longer (have new CPUs produced for it) than 3 to 4 years. The 775 has had an exceptionally long lifespan but most don't. None of us should expect a socket to last longer than a "tick-tock".. maybe if lucky a "tick-tock-tick" http://www.vidivodo.com/331420/kesha-_-tick-tock

As mentioned already, I doubt this is much of a concern for many who visit here and make the frequency of upgrading components one of life's pleasures!! A socket change is just a convenient excuse to upgrade!!

plug-socket2.jpg
 
Argh, I can't wait that long with my E6550 on this Inspiron mobo. Guess I'll pick up a P45 + Cooler and try OCing.

And I was hoping to be able to skip this gen and go with Sandy Bridge too. :(
 
Back
Top