new rig-- buying next week

goleldar

n00b
Joined
Apr 20, 2007
Messages
24
This is my first build. I am really excited. Having spent countless hours reading the forums this is what I have come up with:

http://secure.newegg.com/NewVersion/wishlist/PublicWishDetail.asp?WishListNumber=5440806

The two things I am unsure of is the case and monitor. What do you think or the hp 20.1 as compared to the 226bw?

Please let me know if any of these will not be compatible as well as comments and suggestions. Also could you please advice which length, what type and how many rounded cables I will need.

Thanks in advance. I look forward to posting pics of this build next week !! :D :D
 
You can get the Corsair PSU from buy.com for 79AR (69 if using Google checkout). Not the best seller but its a pretty big price difference. I would just get the regular X-FI Xtremegamer unless you want the front panel as the X-RAM really doesn't do much and would probably get a Tuniq Tower since its a good bit better then the Ninja. Also, I would definetly get a better motherboard if you plan on some good overclocking like a QuadGT, DFI 965-S, P5B Deluxe, P6N etc.. Some people are having problems with higher overclocks with the DS3.

The monitor is good although you could save money on it and not notice a huge difference and I'm not a fan of the Armor but others seems to like it. I would go for an Aurora or P180/182 or even a LL V1000/1100 if you're willing to dish out $50 more on it.
 
You won't need any rounded IDE cables unless you have other components you didn't tell us about and plan on using in the build. The optical drive and hdd listed in that list are both SATA, and the DS3 comes with 4x SATA cables.

Regarding the build, you don't really need those G.Skill HZ sticks, since you're going with the E6600. The HZ sticks are great overclockers, but you don't need overclocking ram because of the CPU's high multiplier. 9*400=3.6Ghz, which is close to the chips limit on air. Since you don't need to reach 500Mhz, theres no point in those sticks. Go for some cheaper kit instead, like the 2GBNQ.

The rest of the build looks great. Stick with the Samsung.

The DS3 is one of the best boards out there, and I have no problems running my E6400 system at 3.6Ghz (8*450). The E6600 doesnt need as high an FSB to reach 3.6Ghz as my E6400, so you'll be fine with the DS3. My Scythe Ninja Plus Rev.B keeps it at 37°C while idle and 56°C on load -- I think thats pretty good for only $40. My Tuniq doesn't do as great of a job and costs quite a bit more (for a cooler). :(
 
Back
Top