New Q6600 computer sluggish. Bad L2?

lol

Limp Gawd
Joined
Jan 14, 2002
Messages
377
Hi I'm a long time member here and lurker. Today I've built my third PC, but I've encountered some very sluggish performance and could use some advice.

System specs:

Core2 Quad Q6600 @ stock 2.40ghz/1066mhz FSB
ASUS P5N32-E SLi
2x1gb Crucial Ballistix PC8500/1066mhz @ PC6400/800mhz
1x eVGA GeForce 8800GTS @ stock w/ latest forceware
1x WD Raptor X SATA150 10krpm 150gb boot
4x Maxtor 500GB SATA2 (storage)
Thermaltake Toughpower 750W Modular PSU

I put together this system expecting it to smoke my old system (A64/1gbPC3200/R9800). Unfortunately, this computer is running much slower in comparison (and thats with my old system running a 2 year old format of windows).

I've looked through a LOT of Q6600 CPUID screenshots, and I've noticed my L2 cache seems off. I'm thinking perhaps this is the source of the problem, but I'd like any input possible.

Windows takes about 25 seconds to boot. SuperPI takes 29 seconds to calculate 1M. 3D Mark06 is barely breaking 10k. Memtest86 ran 7 passes with no errors

q66001.png

q66002.png

q66003.png

cache.png


What is also interesting is my Raptor doesn't seem to be all its cracked up to be. Sandra reports my Maxtor 500gb as 74MB/s index and 13ms random access time. The Raptor reports as 74MB/s with 8ms random access times. You'd think it would be faster, right?

Any help or suggestions would be greatly appreciated. Thanks.
 
Well I'm not sure if SuperPi supports quads out of the box (I've seen it get 21 seconds in tests at 1M & stock), but still, 21 < 29. This is strange, never seen anything like it w/ a Q6600.
 
I did not know your baord supported Quad? I think you have a bios issue and perhaps a chipset driver issue as it relates to your sata controller and the raptor
 
update your BIOS, if it doesn't work then the cache must be defective and RMA it.

you need BIOS 0501 for the B3 but if it a G0 and its mis reading it you need BIOS 1103
 
I know this might be a stupid question... but... have you installed all the correct drivers for your motherboard? Chipset and the like?

That will make a huge performance difference.

However, it also seems as if something is wrong with your motherboard and as mentioned, try flashing your BIOS to a newer firmware.
 
Back
Top