New PSU but hating it already

TallGntlmn

n00b
Joined
Nov 25, 2008
Messages
2
I've had an Antec Sonata I for about 4 years now. It rocked up until yesterday. The PSU took a dump. It could not even boot my system. Tried another PSU and the machine boots. So I come to the conclusion, I don't need to rebuild my box and can just get a PSU.

Tonight I got an Antec Neo-HE550. Plenty of power for my Athlon64-3000, 1 HDD, DVD, CD, and Ti4200 video. Overkill in fact if I read things right. But it was only $50 (Microcenter, ATL), that's half Newegg's price.

Now then, the problem and why I am hating it so far. The 120mm fan on the Sonata was controlled by the "fan only" connectors off the old PSU. This new PSU does not have those. It's running full speed and I can hear the dadgum thing. I never could before. So I need to find a way to quiet that fan down to where it used to be. I don't want to get into anything major or potentially harmful to the PSU. This fan is connected to a molex that is connected to the CD and DVD.

Should I:
A) keep it and undervolt it somehow (would I need to use a different connector than the one on the DVD and CD?)
B) replace it with a Scythe or Noctua in hopes that I won't be able to hear it

I bought the Sonata because I didn't want to feel like I was sitting in the server room at work when working at home. That seems all defeated now. I want to to be quiet again.

Any ideas are greatly appreciated.
 
Remove the fan grill, it will stop a little of the noise.
 
The fan speed on the new antec should be temperature controlled. Antec is already known for (or atleast had been in the past) for TOO low of fan speeds causing the PSU to die prematurly. Likely the case with that old PSU.
 
There is no real grille on the Sonata I. It has pretty large holes on it. The fan that is making the noise is not the PSU fan but rather the 120mm case fan. When I unplugged the case fan, I could only hear the fan on the Ti4200 and the CPU. On the old PSU, it was controlled by temp sensor in the PSU from everything I've read about it.

I don't know if it was premature death of the old one. It was 4.5 years old. I think the old PSU suffered from blown caps. That one was allegedly well known for having that issue. When I opened it up, either they were really sloppy in building it or the caps did leak all over. After it was unplugged for a while I would hit the power and it would come on and turn off. When I figured out it had died, it would power on the fans and hdd but the motherboard would not post.

I am probably going to try to undervolt the case fan. I need the tweezers or small screwdriver to pop the pins out of the molex. It's either that or buy a new one with either a temp sensor or one well known for being quiet.
 
Ahh, ic... Well like you said, you can undervolt it by hooking it up to the 5v line, though I would opt for a temp controlled fan so it spins up when it needs to.
 
There is no real grille on the Sonata I. It has pretty large holes on it. The fan that is making the noise is not the PSU fan but rather the 120mm case fan. When I unplugged the case fan, I could only hear the fan on the Ti4200 and the CPU. On the old PSU, it was controlled by temp sensor in the PSU from everything I've read about it.

I don't know if it was premature death of the old one. It was 4.5 years old. I think the old PSU suffered from blown caps. That one was allegedly well known for having that issue. When I opened it up, either they were really sloppy in building it or the caps did leak all over. After it was unplugged for a while I would hit the power and it would come on and turn off. When I figured out it had died, it would power on the fans and hdd but the motherboard would not post.

I am probably going to try to undervolt the case fan. I need the tweezers or small screwdriver to pop the pins out of the molex. It's either that or buy a new one with either a temp sensor or one well known for being quiet.

Heh, don't destroy a molex with the wrong tool:

http://www.xoxide.com/molexremover.html

Cheap and handy.

Or, add some speed controls:

http://search.xoxide.com/?page=1&query=rheobus&spellcheck=y

Luck:)
 
I used a mini flat head screwdriver back when I used to make the 7v mods LOL
 
Back
Top