New mobo, same otherwise: reformat?

Doc

n00b
Joined
Feb 5, 2004
Messages
19
Flame me if you will, but I am upgrading a socket7 system with a new motherboard. It's for my sister after I build a new system.

I am going from a Soyo sy5ema+ with the Via ETEQ chipset to a DFI K6XV3+/66 with the Via MVP3 chipset. All other hardware will remain the same.

Would you guys recommend reinstalling win2k after swapping out the board or just reinstall the Via 4in1 drivers after boot?

Thanks!
 
You should be fine if you use the sysprep tool to package up the HD before you install the new motherboard.

If you don't use sysprep. You will most likely have to do a whole new install.
 
There is another method of running a restore on the OS before you switch. I prefer the sysprep method since that's what every corp/OEM uses. I use it frequently on when building images, works like a champ.
 
Awesome. Thanks for the help guys.

I was a bit worried when the win2k installation wizard came back up when booting but I suppose it was supposed to do that all along as it worked out fine. I am writing this with the new mobo installed. ;)

again, thank you!
 
Right, that's the whole point. Sysprep removed all hardware information, so a 'mini-setup' wizard is launched redetecting all the new stuff... Sysprep rocks, it's also a good tool for removing all your drivers in on sweep. :)
 
damn never thought of removing drivers that way! Will have to try that out on 1 of my boxes at home. Better than reinstalling the whole OS. Sometimes my brain just doesn't work.
 
Back
Top