New mobo + CPU = Wont boot to windows XP

laxjax13

Limp Gawd
Joined
Dec 7, 2003
Messages
177
Ok i just installed a new Soo SY-KT600 Dragon Plus v1.0

with an AMD Mobile 1500+ and a 256mb stick ofpc2100 Crucial ram
Using Windows XP- Pro

I get past the start up but once the pc gets to the little XP flag with the blue thing that goes back and forth at the bottom the pc restarts itself. Always

a blue screen with words flashes but it's to quick to read what it says. plz help me!

i can post more info if neede, just ask !
 
If the motherboard is different than the original board that was in there you are going to have to re-install Windows XP. You can not change to a different kind of motherboard and not re-install.
 
i upgraded from a p3 mobo.

i tried reinstalling xp through the boot disks but i would get an error and would be forced to restart again :mad:
 
Thatonen00b said:
Had the same problem on many comps and everytime its the memory.

Yeah I've often had that same issue. Motherboards these days are often picky about what ram they'll use. You should be able to reinstall XP no problem. If you can't you've got a hardware problem.
 
Deke said:

And if you've already swapped the board, do this:

boot to something you can manage files with

copy the file "system" <- no extension

from c:\%winnt%\repair

to

c:\%winnt%\system32\config

This replaces your hardware registry with the generic pre-driver one you first started with.

However, if you are bsod'ing during setup (or other errors)- you have more problems than just this.
 
I don't think he's getting past the file copy process. In which case it may be memory compatibility. I've run into the exact same situtation with an Intel i865PE board and an Asus i875P board. In both cases it turned out to be memory compatibility problems.
 
Thatonen00b said:
Had the same problem on many comps and everytime its the memory.

Ah, young grasshopper!
Not all is as it appears.

I just got a 2400, KT4 Ultra, and Elixer (ew!) memory.
Tried to install, and got restart errors.
Ran memtest, it said the memory had 2K plus errors.

Turned out to be the 2400.
Usually it is the memory. Not always.
 
Back
Top