new mobo and new a64 cpu, won't boot :(

Mizugori

[H]ard|Gawd
Joined
Mar 25, 2004
Messages
1,240
ok i just dismantled my pc and replaced the abit nf7-s and barton 2800+ with

these:

http://www.newegg.com/Product/Product.asp?Item=N82E16813157081

http://www.newegg.com/Product/Product.asp?Item=N82E16819103533

the rest of the system is an antec truepower 430watts, an AGP ati radeon 9800xt, and 2 x 512mb Patriot xbl pc3200

ALL i hooked up to start were the cpu, motherboard, psu, and video card. everything comes on, fans spin on the cpu and video card, but nothing on the monitor. i KNOW the video card is fine, i even tried putting a 9700pro in and that didnt work either. afterwards, i put the 9700pro back into the dell it came from and it works fine.

i tried moving the ram to the other two slots, nothing. i tried just one piece of ram; nothing.

i took out everything except the cpu and when i turn it on, it beeps a sequence of 3 tons repeatedly so the cpu and mobo are ok?? i think?

any ideas?
 
Try to follow the boot sequence from this site Check your jumpers against the manual and clear the CMOS. Might also check to see if the CPU and heatsink are seated properly.
 
That motherboard is both AGP & pciE.

You need to enter the bios and DISABLE whichever type you do NOT have (pciE).

that should do it.
:)
 
if i could even see the bios that might work...but im not getting anything. not even the usual single beep that you get when you turn a computer on. the fans come on thats about it... unless i take out the ram and turn it on, then it beeps its ass off.

and the jumpers are all correct
 
Is there ANY info in your manual how to disable either pciE or AGP?

might have to pull out the cmos for a few minutes to set it at defaults.

Is pciE the default in ur manual? it MUST be unless mobo is defective.

unless Im missing something (quite possible as Im stoned to the bone)
 
I agree with the clearing the CMOS. I'd prolly leave it cleared for the night, just to make sure it isn't some weird capacitor issue.
Are you installing everything in your case or outside the case? Maybe there's something making contact with the mobo.
 
hmm im looking for a way to disable AGP or PCI-E but i dont see it :( i assumed u just used either one. i have cleared the shit out of the cmos lol nothing changes so maybe pci-e IS the default?
 
Well, did you know that the board has an issue with the 9700Pro? Some people have solved it with setting the AGP speed to 4X. There have been issues with other ATI cards that have been solved with setting to AGP4x. OC workbench forums has a thread you can browse. They also have a beta OC BIOS. If you can borrow a pci vid card or a Nvdia AGP, you might be able to set AGP to 4x
 
no i didnt. but that still doesnt explain why when i have just the ram and cpu in, i dont get ANY beeps... shouldnt it be signaling that no video device is connected?
 
That's the first time I've heard that. That has to be a bios bug. I have to report that and see if I get any feedback. Bluetooth won't let you link to other sites. I think he's a being foolish/unfair and that is the watered down version of how I feel on the subject. I'll report the anomaly though.
 
yeah RMA progress lol! sending the hunk of shit back to newegg and going full blown new shiat. im probably going to grab an asus an8 sli board, a 3700+ san diego, antec neo 480watts psu, thermaltake soprano case, and a leadtek 7800gt. ill keep my 2 x 512 patriot xbl pc3200 and seagate 200gb sata for the time being

thanks for asking; i just got frustrated and asrock doesn't have shit for support if u have problems
 
Yeah, I ordered the board myself and newegg or the mail lost the check. Maybe that's a good thing. LOL No, I need AGP for now and PCIe later on. the problem is, ATI has 30% of the Graphics market and Asrock may wind up with as much as 25% returns on this board because of this BIOS issue. They really need to solve this problem.
 
yeah the real kick in the ass is that some people are having trouble with newer ati cards in general on this board. not at boot, but once windows is installed...a bunch of people with radeon 9700s and 9800s report frequent freezing issues.

it looks like im going all out... but it will be one sick gaming machine :D
 
Mizugori said:
yeah the real kick in the ass is that some people are having trouble with newer ati cards in general on this board. not at boot, but once windows is installed...a bunch of people with radeon 9700s and 9800s report frequent freezing issues.

it looks like im going all out... but it will be one sick gaming machine :D

Antec P180 > any Thermaltake case

LianLi, Coolermaster, Silverstone

Thermaltake cases are cheaply built & flimsy, IMO.
 
hmmm i looked at that but its a little pricey considering it looks like such a pain in the ass to assemble (which pisses me off in itself; why can't they pre-assemble it?) and also people have complained about it being noisy with the stock fans. the TT one is only 21 dba.

and... what's up with newegg charging 19 dollars to ship it?!

can i get a decent one for 100 or less that will cool fairly well without being terribly loud and that won't require much if any assembly? i don't intend to OC the computer btw.
 
Back
Top