New MB but no activity

Beliskner

Weaksauce
Joined
May 1, 2003
Messages
72
Good day everyone,

I hate to bug you all with this but I figured I needed other opinions and thoughts.

Recently my GFs MB blew so we ordered a new one to replace it. Unfortunately the original one wasn't available so we did a little upgrade. I got the MB loaded in last night, everything connected and it does seem to come to life. However I am not seeing any activity from the HD or nothing on the monitor. (i.e. won't post)

Troubleshooting I have done:
Replaced the PSU (Originally thought that was the issue)
Replaced the MB (originally had EVGA nForce 650i Ultra Socket 775 Motherboard and now has XFX nForce 680i LT SLI Socket 775 Motherboard.)
Removed RAM and tried one stick at a time.
Removed all the extras (Vid card, HD, ect.)
Double checked the CPU to make sure it was seated properly.
Reset the Bios

So far, all I get is power, the fans kick on but no sounds as to any activity.

The two main things going through my mind is the CPU and power connections. The reason I say power connections is that on the new board it has an 8 pin connector. My PSU doesn't but in their manual (MB) it says I can use the 4 pin connector and plug it into pins 1, 2, 5, & 6 which according to their image it's on the left side but my PSU connector will only fit in the right side. As I said it powers it up but nothing beyond that.

So tonight I'm going to try a different video card and repeat the steps above to make sure I didn't forget anything.

If you guys have any other ideas to try or thoughts on what it could be i would greatly appreciate it if you would share. I do have a ticket in with XFX as well so hopefully they may be able to provide some insight.

For additional info, here is the main specs on her system:
EVGA nForce 650i Ultra Socket 775 Motherboard (Old MB)
XFX nForce 680i LT SLI Socket 775 Motherboard (New MB)
Intel Pentium Dual Core E2200 2.2Ghz
800Mhz Crucial 1024MB PC4200 DDR2 (x2)
XFX GeForce 8400 GS 512MB PCIe
Diablotek PHD450 450w ATX Black PS

Thanks in advance.
 
No. it had the 4 pin one like this one. the only difference between the two is that the new one has an 8 pin connector.
 
Can you test out a PSU that has the proper connectors? It sounds to me like it's giving your mobo some juice but not quite enough to fire up the processor or hard drives.
 
Back
Top