new i7 build startup probs

xnorthx

Limp Gawd
Joined
Sep 13, 2008
Messages
400
my brother recently got some components for his first i7 build

i7 920
Gigabyte EX58 UD3R
6GB Corsair DDR3 16000

He kept his 8800GT and his Antec 500W PSU

Upon first installation, as he hits the power button, he gets power to all case fans and the CPU and GPU fans for roughly 1 second as if they're getting only a small "burst" of power.
After this, the fans die and nothing else happens. If he tries again, same story.

He removed all but one stick of RAM, successfully installed Windows 7, made it all the way to the desktop, and seemed ok. He then added the two other sticks and it refuses to boot again. He takes the two sticks back out, and it still won't boot in a configuration that previously worked.

I'm trying to figure out the error here. PSU? CPU? MOBO? RAM?

The funniest thing of all is that i'm running an i7 920 + Gigabyte EX58 UD3R setup right now with no problems and we have the exact same hardware now except for power supplies. Maybe that's the culprit?
 
make sure the voltages are set to spec, remove as many case fans, drives and ram sticks and run the bare minimums
 
okay, i FINALLY got around to updating and trying some new things:

turns out, the damn build won't POST if an ethernet is plugged into the onboard port ! if i remove the cat5 from the onboard, it posts no problem, all 6GB of ram, etc. great. as soon as i plug it in and try to power on, it won't post.

ANY idea why this would happen?
 
Faulty ethernet cable? Try another cable?

BTW, the SP2.0 500W is notorious for high failure rates. If he bought the unit within the last 3 yrs, he should definitely RMA it with Antec. If its no longer under warranty, he should still replace it, as thats an old model with inadequate cooling, which could case failure -- such failure could take other parts along with it.
 
in case anyone is still interested, i exchanged the motherboard at Microcenter in Houston which was no hassle at all. silky smooth transaction, great customer service.

of course, after this, the system booted up fine. thanks for any and all input and i will definitely look into this antec PSU issue. There's some great corsair deals floating around hotdeals lately. :D
 
Back
Top