New high end rig - need help on specifics

Ulrezaj

Weaksauce
Joined
Nov 29, 2004
Messages
65
New gaming rig, this is the setup so far. What I need is help on the specific brands, as I know little about interoperability between these components.

Core 2 Duo E6850 (when price drops)
evga 680i A1
2x 1GB of something PC8000+
2x some 8800GTX (driving 30" with at least 4xaa/8xaf = too hard for just one :-\ )
WD Raptor 150 (OS)
Hitachi 750GB (apps, storage)
Thermaltake 750W toughpower
And a watercooling setup that I haven't finalized yet.

I put down the E6850 but in all honesty I'm still torn between that and the Q6600. I'm trying to make this system as quiet as I can, while still pushing the fsb to 400 if the board will make it that high. Given that, the E6850 would definitely be better (less heat = less fannage needed on radiator), but then there's all these games coming within the next 6 months that supposedly can utilize 4 cores. I could use some input from someone with hands-on experience with these.

Evga for the mobo because everyone seems to agree that's the best SLI board for overclocking right now. The ram, if no one recommends anything, I'll probably just pick up the cheapest of OCZ or Corsair or something. They're all at 5-5-5-15 anyway. For the video cards, I'm pretty sure they all follow the same reference board so in terms of cooling, adapting them to fit my WC setup shouldn't be hard. So then it's just a price/warranty thing. I've heard XFX is good for that. Any thoughts? And the drives, still not sure if I want to do as per above, or stripe a couple 500 GB's.

Like I said, it's really the fine details I need help on. Any advice is welcome!
 
Nice build
For watercooling I would recommend a koolance system. I know a few people who have the exos and it works wonders and is dead silent.
 
Agreed, it's a good looking build.

As for the processor, you should evaluate everything you do with your system to determine whether or not you'll want a quad. Granted, most games don't make use of quad core chips, but more will. What else do you do on your system? media encoding? hd-video playback? image proessing? or perhaps software development using vms? In all these cases, you'll benefit from four cores today. If you're planning for a multi-core future, then get the Q6600 as four cores at 3.2-3.4 ghz > two cores at 4 ghz (assuming the program in question benefits from four cores.)

For the RAM, you don't need PC8000+, as both the Q6600 and E6850 ship with high multipliers (and besides, you'll never reach a 500mhz+ FSB with the evga 680i.) Stick with PC-6400 RAM and save money. Any mainstream 5-5-5-15 (or even 4-4-4-12) brand will do well, but PC-6400 RAM with D9 chips are best, with great OC potential (should you want faster than PC-6400 RAM w/o paying for it.) Besides, if you run PC-6400mhz RAM with 1:1 timings, you've got your 400mhz FSB (which the A1 won't have a problem with,) so if you don't want anything faster, paying for overclocked RAM is a waste.

Also, raptors are loud, and in my opinion, not worth the price premium.

Mark.
 
Agreed, it's a good looking build.

As for the processor, you should evaluate everything you do with your system to determine whether or not you'll want a quad. Granted, most games don't make use of quad core chips, but more will. What else do you do on your system? media encoding? hd-video playback? image proessing? or perhaps software development using vms? In all these cases, you'll benefit from four cores today. If you're planning for a multi-core future, then get the Q6600 as four cores at 3.2-3.4 ghz > two cores at 4 ghz (assuming the program in question benefits from four cores.)

For the RAM, you don't need PC8000+, as both the Q6600 and E6850 ship with high multipliers (and besides, you'll never reach a 500mhz+ FSB with the evga 680i.) Stick with PC-6400 RAM and save money. Any mainstream 5-5-5-15 (or even 4-4-4-12) brand will do well, but PC-6400 RAM with D9 chips are best, with great OC potential (should you want faster than PC-6400 RAM w/o paying for it.) Besides, if you run PC-6400mhz RAM with 1:1 timings, you've got your 400mhz FSB (which the A1 won't have a problem with,) so if you don't want anything faster, paying for overclocked RAM is a waste.

Also, raptors are loud, and in my opinion, not worth the price premium.

Mark.
Great post, covered just about everything, I also am agree with you on the raptors, I have them and i did a test with 2 500's in a raid with my OS and games, and i did not notice any slower load times, so i think the hole raptor thing now is just a load noise maker. Even with a single drive you wont notice any major differences between a normal drive and a Raptor
 
Thanks for the all the replies!

90% of the time spent on my home machine is gaming, and it's usually pretty new stuff too. I've been playing Supreme Commander and C&C3 for a couple months now and my good ol X2 4400s are definitely feeling their age whenever I try to push for higher IQ (I'm all about the IQ). The other 10% is spent on pretty pedestrian stuff - mail, net, occasional photo cropping, etc., so I would really characterize this machine as built purely for gaming. So given that, and from what I'm hearing, I should be going for the E6850 then because the only thing going for the quad is the possibility of better multithreading utilization in future games, whereas from reviews I've read, the higher clock on a dual seems to win on most fps comparisons here and now.
 
Thanks for the all the replies!

90% of the time spent on my home machine is gaming, and it's usually pretty new stuff too. I've been playing Supreme Commander and C&C3 for a couple months now and my good ol X2 4400s are definitely feeling their age whenever I try to push for higher IQ (I'm all about the IQ). The other 10% is spent on pretty pedestrian stuff - mail, net, occasional photo cropping, etc., so I would really characterize this machine as built purely for gaming. So given that, and from what I'm hearing, I should be going for the E6850 then because the only thing going for the quad is the possibility of better multithreading utilization in future games, whereas from reviews I've read, the higher clock on a dual seems to win on most fps comparisons here and now.

You have a nice setup man, got a lot of money to drop eh? :p
Well, since you said you wanted to upgrade to a quad core later, I would recommend getting the E6320/E6420/E6600 (E6600 = best bet) for now, save money, then get a quad core later. But hey, if money isn't an issue go w/ the E6850 because it's a GREAT cpu.
 
Keep in mind that Supreme Commander is one of the few games today that truly benefits from four cores. In fact, if you tend to play more RTS games like C&C or SC rather than FPSes, you'll want to go the quad core route. RTS games rely heavily on CPU calculations, such that the CPU will bottleneck before the graphics card.

Another option is getting an E6420 today, as the post above mentioned. This is currently the sweat-spot chip, and is cheaper than the $266 you're planning to pay for an E6850 or Q6600. With money saved (and either an EVGA 680i-A1 board, or any P35 board,) you can buy a Penryn quad in a year.

Do not get an E6600 today, as current batches don't OC well. In fact, an E6850 is technically a newer stepping E6600, with just a higher default FSB. The multiplier is the same, such that if you dropped the 333mhz FSB to 266, you'd get a 2.4ghz E6600. The reason people are so excited about the E6850 is because G0 stepping chips look like they'll overclock like madmen. This has nothing to do with the technical specifications of the chip, but rather the characteristics of the batch in which it was produced.

Mark.
 
Back
Top