New desktop Xblade

[Smithrit09]

I buy new Xblade case so let start build. This is NEW case!

NOTE: Blue font is new information added.

Here pictures of my new case:

Forget about CD-Drive, I removed it from case. It is old.

That where I can put four LED light but only two blue LED include.

I took everything out and clean it.

Xblade case features

* Includes 80mm Blue LED side window fan
* Includes 80mm Blue LED in-take fan located in front of case. Also accepts 92mm & 120mm fans in front.
* The rear exhaust excepts 80mm or 120mm Fans (Not included)
* Exterior door cover for external drive bays.
* X-Blade Black CS859BK ATX Mid-Tower Case has a total of 10 Drive bays
* 4 x External 5.25" drive bays
* 2 x External 3.5" dive bays
* 4 x Internal 3.5" drive bays
* Includes custom designed side window with 80mm Blue LED fan.
* 2 x USB 2.0 ports & Audio ports (Headphone & Mic)
* Max. 3 Cooling fans can be installed

Xblade case specifications
* Motherboard Type: ATX from factor or smaller (Max Size: 12" x 9.5")
* Frame Material: Steel
* Cooling Fans: 1 x 80mm Blue LED fan in front, 1 x 80mm Blue LED in side window, 1 x 80mm or 120mm rear fan position
* Front I/O Ports: 2 x USB 2.0, mic & headphone jacks.
* Mounting Kits: Included
* Hard Drive & Power LEDS: Included
* Total Bays: 10
* External Bays Available: 4 x 5.25"; 2 x 3.5"
* Internal Bays Available: 4 x 3.5"
* Actual Dimension (L x W x H): 20L x 8W x 17H
* Number of slots: 10

 

[PixelsGC]

You can put one Rad where the front 120mm fan is, just gotta remove the bottom hard drive bay holders, and you can put the other on the back fan. This is what I did in one of my lian li's

 

[Smithrit09]

You can put one Rad where the front 120mm fan is, just gotta remove the bottom hard drive bay holders, and you can put the other on the back fan. This is what I did in one of my lian li's

My hard drive holder is lock, cannot remove those. One Rad will fit on front 120mm fan case, but the 120mm fan will not fit. Can I use two single Rad together? Like Rad--Fan--Rad or Fan--Rad--Fan--Rad something? Or something else idea.

 

[nlancaster]

Just drill the rivets holding that HDD bay. THen move it back and rerevit or leave it out.

 

[Smithrit09]

Just drill the rivets holding that HDD bay. THen move it back and rerevit or leave it out.

I guess I will leave it. I will put Rad on back case 120mm fan. I might try Fan--Rad--Fan--Rad together look like

. Is that good idea?

 

[Kaldskryke]

Stacking isn't an entirely new idea: Swiftech makes rads specifically for that. However when you stack you really increase the resistance to airflow. Two fans will help, but make sure you're using fans with high static pressure, or you run the possibility of making your total performance worse than just a single rad.

 

[Smithrit09]

Stacking isn't an entirely new idea: Swiftech makes rads specifically for that. However when you stack you really increase the resistance to airflow. Two fans will help, but make sure you're using fans with high static pressure, or you run the possibility of making your total performance worse than just a single rad.

Ok here website I found is what I want to buy two Rad in FrozenCPU?

If can't, I will buy one Rad.

Thank for help

 

[FalconSS]

lol, brings back memories. First computer I built that wasn't mine was built in that case. Helped a friend part a PC, and he chose that as the case. it was so funny because he had a blue LED slot exhaust fan and a blue 120 MM strapped to the inside of the hard drive cage. That thing was SOO bright!!. Everyone who saw it loved it though. It got MUCH more attention then my Antec Super Lanboy

 

[Smithrit09]

I wonder will that good Power Supply for my case?

here link Ultra X3 1000W Energy Efficient Modular Power Supply