• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

New custom built PC...Wont boot up.

S

ShockTech

Limp Gawd
Joined
Feb 6, 2004
Messages
391
Hey guys, i just built another system.

So i go to start it up for the first time, and it says "CPU Has changed, please enter CMOS and reenter settings" Then the computer just shuts off. The LED's on the board are orangey/red if that helps.

Now, the Hard drive is brand new, the CPU is brand new, so is the mobo.


The CPU Is a P4, 3.2
Mobo is a DFI Lanparty Pro875B Rev. B.

any ideas?

Also, when it boots up, it says the CPU temp is 75-90 Degrees celcius..

Please Help!

Thanks
 
ok the CMOS problem is gone..now it just shuts off when it goes to go farther than the loading of the CMOS

says the CPU temp is 88 degrees celcius...


can i use a stock heatsink from a P4 3.0?
 
Try reseating the CPU and HSF.

If it still doesn't work, try putting another CPU on the board (if you have one).
 
You must log in or register to reply here.
Back
Top