New Computer - Does this setup make sense?

Joined
Apr 18, 2004
Messages
29
It's been since Feb. 2003 I've been running my current rig, and amid the constant freezes, reinstalls, and inability to play new games; I need a new one.

Suffice to say, I've been out of the market since then and I'm wondering if this computer makes sense. I'm planning on keeping only my Logitech Z-560s and my old IDE HDD from the current computer; everything else new.

CPU - E6600 - $225 from ZipZoomFly
Video Card - XFX GeForce 8800GTS 320MB - $255 AR from TigerDirect
Sound Card - Creative Sound Blaster X-FI Xtreme Audio (OEM) - $53 from CanadaComputers
RAM - OCZ DDR2 PC2-6400 800MHz Platinum XTC (2x1024MB) - $75 AR from CanadaComputers
Motherboard - Gigabyte GA-965P-S3 Socket 775 - $111
Case/PSU - Antec Sonata III w/ EarthWatts 500W PSU - $119 from CanadaComputers

So right now I'm looking at $838 without tax on all components.

What I'm asking you is:
-Does this set of components work well together?
-I'm looking at playing games like FEAR, Bioshock, Crysis
-Are there any substitutions you would make that would get similar performance, yet cheaper?
-I live in the region of Toronto, Ontario; any deals I should be looking out for?

Thanks for your advice, any suggestions are welcome.
 
The E6750 looks nice. I'll read some more on it now.

And you recommend the Gigabyte GA-P35-DS3R because it supports the higher speeds of the E6750.
Is there anything cheaper than that board? It's almost twice as expensive as the one that I'm looking at now.
 
why? can you provide add'l info?

The recent batches of the E6600 have been not so great at overclocking. Also, it has since been replaced with the E6850. Though, the E6850 is priced a bit higher, so I agree with the suggestion to drop down to the E6750. The E6750 replaces the E6420. Its a revised version of the conroe, and can OC much better than the older versions. Also, its cheaper, and not to mention the faster stock speed!

The P965 Express chipset was replaced with the P35 Express chipset. So, the successor to the GA-965P-DS3 is the GA-P35-DS3L. If you need raid, get the DS3R instead, as Superhuman suggested.

What size monitor do you have? These are my minimum recommendations:

15" - 17" (1024x768): 7600GT
17" - 19" (1280x1024 or 1440x900 ): 8800GTS 320MB or X1950GT
20" - 22" (1600x1200 or 1680x1050): 8800GTS 640MB or X1950XT
24" - 27" (1920x1200 or 1920x1080): 8800GTX or Ultra
30" (2550x1600): 8800Ultra, 8800GTX SLI, or 8800Ultra SLI

Does ZZF ship to Canada? NCIX.com is also a popular site for canadians.

You can reach around 3Ghz with stock cooler. Go for a Scythe Ninja Plus Rev.B, Tuniq Tower 120, or Thermalright Ultra 120 eXtreme + S-Flex fan for a better OC.

E6750: 8 * 333 = 2.6Ghz, DDR2-667 << STOCK speeds
E6750: 8 * 400 = 3.2Ghz, DDR2-800 << Easy OC
E6750: 8 * 450 = 3.6Ghz, DDR2-900 << Good OC

And you recommend the Gigabyte GA-P35-DS3R because it supports the higher speeds of the E6750.
Is there anything cheaper than that board? It's almost twice as expensive as the one that I'm looking at now.

Check out the GA-P35-DS3L and the Abit IP35-E.
 
17" monitor at 1280x1024

I'm not sure if ZZF ships to Canada, I'll have to check that out.

Thanks for the background information on these components, enginurd.

P.S., I'm not really looking at overclocking.
 
hope you didnt order your processor yet because they have E6600 OEM's going for $136 link. Also check out the deals section they have a post on it. hurry before they are gone.

edit: just realized they aren't shipping to canada right now.
 
I agree with Enginurd on all points. No need to buy yesterday's outdated components when the replacements are cheap, plentiful, and perform much better.

Mark.
 
I've read up on them, and the E6750 and the GA-P35-DS3L do seem very nice =)

Since I'm not overclocking, does my choice in RAM really matter?
I'm looking at getting OCZ DDR2 PC2-6400 800MHz Platinum XTC (2x1024MB)
 
FYI, The newer batch of E6600's can only OC to around 3.2-3.4Ghz. Also, since its OEM, the CPU only has a 90 day warranty.

I've read up on them, and the E6750 and the GA-P35-DS3L do seem very nice =)

Since I'm not overclocking, does my choice in RAM really matter?
I'm looking at getting OCZ DDR2 PC2-6400 800MHz Platinum XTC (2x1024MB)

No, not really. If you'd like the ability to OC later, then yes, it will matter. However, DDR2-800 isn't much more than DDR2-667, so just stick with 800. Those OCZ sticks are fine.
 
Back
Top