New computer build problem

Status
Not open for further replies.

J Macker

[H]F Junkie
Joined
Jan 25, 2001
Messages
10,167
I've got a friend who called me up and is requesting assistance on the issue he's having with a new computer build.

Upon going through the WinXP 64bit install, the files are copied over and the computer restarts, then POSTS, then won't continue with the windows install. Instead it goes back to the beginning step of the Windows setup, then restarts.

Hardware:
Xion 600W psu
Gigabyte GA-M55SLI-S4 motherboard
AMD 4800+
Corsair XMS 2GB
old pci (not pci-e) video card.
WD 500GB hard drive

My suggestions to him:
Check bios boot sequence. To boot from CD, you must hit any key when requested.
His reply: 1st boot: cd, 2nd boot: hard drive. It doesn't ask for permission, it just goes straight from CD.
Check boot sector protection in bios.
Check for motherboard shorts.

Anything else you guys can think of?
 
so, i'm confused. exactly what happens after the PC restarts after initial file copy if he has the CD *out* ?
 
Once the files are copied, take out the CD, wait, then it will prompt for CD and setup will continue.

Atleast, thats what I would try 1st.
 
Once the files are copied, take out the CD, wait, then it will prompt for CD and setup will continue.

Atleast, thats what I would try 1st.

That's what he does in order to even get it to boot from the hard drive. One does not need to change the boot sequence between copying files and the restart during a windows install. You just don't "hit any key to boot from cd"

As I stated in the original post, I already told him the things which you guys suggested.
From what I recall during the brief moment I spoke with him, after the restart, the computer automatically goes back to booting from cd, but then restarts again. It is an endless loop unless he hits a key to start a new install.
 
Silly question, is the hard drive properly connected and is it SATA or IDE? Could be that it's copying the files but the hard drive itself isn't on the right channel / setting to be included in the boot order
 
Figured out the problem. Turns out the cd was corrupt. Funny thing is, the first thing I asked him was if he tried a different cd. Oh well.
 
Status
Not open for further replies.
Back
Top