New builds make me miffed

djnes

Fully [H]
Joined
Mar 24, 2000
Messages
19,560
I haven't had much luck lately in building Socket775 setups, and my planned new server is no different. I'm using a Pentium D 820, with an Intel D865GSA Essential Series board. I didn't have another 24 pin PSU, so I am using a 20 to 24 pin adapter.

The board has a green light that goes on when I plug the tower in. My HDD and Power LEDs on the case turn on solid when the tower is plugged in as well. However, when I push the power button on the case, nothing happens. I've checked the power SW connection to the motherboard, and that's okay. In fact, all of those little connections are correct. I unplugged all IDE devices, expansion cards, and swapped out the memory. I've swapped PSUs. Nothing seems to work. I'm guessing it's possible the motherboard could be bad, even though it's light is on. I'm guessing the proc could also be DOA, but I'm running out of things to check. What did I skip?
 
Maybe a better question I should ask is, which seems more likely...the processor is dead, or the mobo is dead? I'm going to try and pick up another Socket 775 proc tonight to try out.
 
I could be completely wrong here, so if I am, somebody correct me.
I think it's more likely your board, for two reasons.
First, if I understand correctly, your power and hdd lights are on solid, before you power on the machine, which is bad.
Second, I have seen, more than once, with a bad cpu, you get an orange power light instead of green. I realize that this may be board specific, but I have seen it.
 
Could be the powersupply i ran into that problem 2 weeks ago. Green light on the motherboard was on but wouldnt turn on. Your not using a P.S. that comes with a case are you ?
 
digital_exhaust said:
First, if I understand correctly, your power and hdd lights are on solid, before you power on the machine, which is bad
That is correct. They go on solid whenever the PSU has juice.
sliperypete said:
Could be the powersupply i ran into that problem 2 weeks ago. Green light on the motherboard was on but wouldnt turn on. Your not using a P.S. that comes with a case are you ?
I tested with 2 known good PSUs. One was an Antec, the other was a Thermaltake. Both are using the 20-24 pin adapater, but if that wasn't working right, I wouldn't get the green light on the mobo...I'm thinking.
 
djnes said:
That is correct. They go on solid whenever the PSU has juice.

I really think that's an indication that something has gone wrong with your board. I believe it's somewhat common to have everything power up for a second when you plug the psu in, but that should not last for more than a second, somewhat like a surge, if you will.
I think, unless someone can offer a reason not to, that it is your board.
 
Could you board be grounded out?, try taking it completely out of the case. And then hook your only needed components up, with the PS.
 
Motley said:
Could you board be grounded out?, try taking it completely out of the case. And then hook your only needed components up, with the PS.

Yeah I was going to say, sounds like it could be a short. Worth a shot, anyway.
 
I'll try removing the board from the case completely when I get home. If not, it looks like I might be buying a board as well to try in the meantime. If there was a short, it's possible that the green light would still go on, right?
 
djnes said:
I'll try removing the board from the case completely when I get home. If not, it looks like I might be buying a board as well to try in the meantime. If there was a short, it's possible that the green light would still go on, right?

It may, I mean "short" is pretty vague, right? It sounds like something somewhere is shorting out, but who knows what or where. Trying it on a table or a piece of wood should give you a good indication.
 
I learned the hard way that sometimes TWO things could be "un-harmonized / borked" in a system all of a sudden. I went through the biggest BS to find that both my PSU and Mobo died at the same time .... along with my router / cable modem / Cable TV remote ..... Everything broke for me last week. :mad: :eek:

But yeah I didn't have to read much of your post to say its your MOBO or PSU or Both.

Oh yeah, and the whole 20 to 24 pin adapter thing .... been there .... ended up burning a ton of gas in the end. Later I Found out that you can convert your 24 pin into 20 by pulling the 4 pins out.
 
Yeah that 24 to 20 pin adapter is a waste of time. I dont think todays systems with power hungry components such as dual core CPUs and feature rich motherboards like 20 pin PSU connections any more. If it were me I would get a different PSU before I wasted any time replacing the MB, CPU, or taking the MB out of the case.

Plus you said this was a sever, right? With servers people are generally wanting better than average stability. Even more reason for a new PSU. :)
 
Hey DJNES, long time no talk.

The fact that the system comes on immediately as soon as the power is turned on leads me to believe that something is wrong on the board itself since you already swapped out the PS with a known good unit. If it's not a grounding issue (like previously mentioned), I would expect a board swap to fix the problem.

good luck man
 
I pulled it out of the case, and had it sitting on a giant static bag. Only the necessary cables were connected, along with one memory stick and the processor. The same thing happened. The green LED is on, as well as the HDD and power LEDs on my case. Nothing happens when I push the power button. I even have the CPU fan plugged in as well, to see if it spins, or even tries. I started an RMA with Newegg, so hopefully it is my board. I'm also going to get a legitimate 24 pin PSU over the weekend.
 
Actually man I believe setting it on an anti-stat bag will cause a short. Try it on a piece of wood, it should be fine. I ran an Athlon MP system out on my desk for a while and no harm done.
 
Just to make sure:
1.You checked your CLR_CMOS jumper
2.You have a fan plugged into for the cpu
3.You have the 4 port square Aux power plugged in
4.You have used 2 different power buttons
5. Have tried using the reset button on the power sw
6. You have P/S2 KB/mouse plugged in
7. Replaced battery
8. Reseat ram , cpu, cards
9.You ps is set to 115v
 
Mos def board and possibly (but not always the case) CPU. I've had to diagnose 4 machines like that today alone (Florida weather + mobo = bad)
 
I popped another proc in and it still wouldn't boot, so I RMA'd the board and it's on it's way back to Newegg.
 
Back
Top