• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

New build will not post.

M

mayonaise812

Guest
I just built a haswell computer system.

1 x SeaSonic G Series SSR-550RM 550W
Crucial Ballistix Sport 8GB 240-Pin DDR3 SDRAM DDR3 1600
1 x Western Digital WD Blue
ASUS Z87M-PLUS LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 uATX Intel Motherboard
1 x EVGA 02G-P4-2763-KR GeForce GTX 760
1 x Intel Core i5-4570
1 x OCZ Vertex 4
1x Noctua u12

computer was running stable for a week untill i installed the noctua cooler on there. at this point the pc will show green led on the motherboard and when shorting the power pins it does not post. The psu fan seems to spin up but the cpu fan does not.

i tried it without the video card, hard drive, layed out on a desk, reseated cpu. switched out psu (same result). on further inspection there seems to be a fan cable that has been burnt/melted?

anyone know what to do?
 
Take a picture of that cable if you can/.
Use the stock HSF.
 
http://imgur.com/a/FKHWJ I put the stock heatsink on there but it still does not post no CPU fan spins. I'm wondering if the cable got caught in the case got ripped apart and fried the motherboard?
 
It's possible.

Did you reset the CMOS?

Also, follow the steps in the stickied "Basic Troubleshooting Guide" on what to do when the PC does not POST.
 
switched out motherboard and its working. must have been a bent pin or something...
 
You must log in or register to reply here.
Back
Top