New build; video crashes - PSU issue?

Kharz

n00b
Joined
Aug 28, 2005
Messages
48
Hey guys -

A quick question. I recently finished a new Conroe build and found out, at the end of the build, that my old power supply didn't have the connectors required by the new video cards (oops). So long story short, I live in NYC and all of the parts arrived on Thursday and Friday - hence I had the whole weekend to build the new machine. As I didn't want to wait another week -- I ran out and bought the best power supply that I could find in NYC.

(Quick side-note - there are NO good computer suppliers in New York City!)

The PSU is a 600 Watt Ultra from X-finity. I know it wasn't ideal - but it had 30 amps on the 12 volt rail - and it seemed like enough. However, I am having random crashes when playing video games. The processor is OC'ed, but I have run dual prime for 24 hours without any problems. I even reduced the clock to default and it still crashed out of BF2. Last night I updated with the newest graphic card drivers - and I will see how that works.

But, I need to ask you guys if I made a mistake with this PSU, and if I should get a better one for my machine. Obviously, I want to NOT get a new PSU if I dont have to - but if it is holding me back - I will upgrade it and write it off as a mistake.

Rig:
Conroe 6600
Asus P5W DH (1100 BIOS)
2 gigs of 800 mhz Team ram
ATI 1900XTX
X-finity PS (http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1273341&sku=ULT31848)
Custom water cooling: Using a massive heatercore with four 120 mm fans; L5 pump and cooling both MB and graphics card. Note running dual prime stable with 3D06 Mark looped, the CPU only got to 30c and GPU to 35. Using OCZ ramsinks and while they are hot - they dont get too hot.

Thanks in advance!

-Kharz
 
I'd try removing the side panel of the computer case to let the PSU run cooler, and if the crashing then decreases, you can be fairly certain that you have a PSU problem.
 
Despite the lower CPU and GPU temps, it could still be a temperature issue.

The 600W X-Finity has front to rear coaxial fans, so the intake fan is facing the back of the optical drives. Your rear exhaust fan is probably pushing out most of what the front intake is bringing in.

Do as LMC suggests and pop off the side panel and see what happens. Either that or disconnect the rear exhaust fan so the air HAS TO exhaust through the PSU.

EDIT: Wait a minute... Water cooling, eh? You didn't make the same mistake I did, did you? Do you have ANY fans in the case?
 
So the side panel is off as I test, and it still crashes

On the water cooling, its a Lian Li V2000b case. I have a 120 mm fan blowing IN over the motherboard. The heatercore is at the bottom with mesh on both sides of it -- so the 120 MM fans (4 of them) blow in one side and out the other. So where the PSU is, it has mesh on either side -- so no way it is a temp issue.

:)

Any other ideas? And thanks for these thoughts / ideas!

-Kharz
 
Kharz said:
Any other ideas? And thanks for these thoughts / ideas!

-Kharz

Bad board, bad RAM, bad video card, bad PSU...... :( Anything really.

Let's do this this way.... You seem fixated on the PSU, and (unlike everything else you bought) you got it locally.

It should be more than enough for your build, so it the PSU IS the reason the PC is crashing, then it should be easy to troubleshoot.....

do this....

Go back to the store and exchange the PSU. If you get a second one and it does the exact same thing, then guess what.... you've got a bad part somewhere.
 
Well if you ran Prime for that long and had no issues, I think it is pretttty safe to rule out heat (i may be corrected). Also, with Prime running that long, the PSU might be fine. Right now I am thinking it is probably bad RAM. Check it with memtest.
 
Back
Top