New Build Suggestions

Carnage311

Limp Gawd
Joined
Feb 6, 2006
Messages
132
Toward the end of this month I am going to be upgrading my computer. I am not sure if I would like to go with c2d or with am2 though. I want to go with am2 if I will be able to upgrade it to barcelona without any performance hit, if I can't then I am going to go with c2d. For am2 I will use the 6000+ and for c2d I will use the 6420. I haven't decided on a motherboard yet, and any suggestions are more than welcome. Here are the rest of the components I am going to use though.

Thermaltake Toughpower 750w psu
http://www.newegg.com/Product/Product.aspx?Item=N82E16817153036

Patriot Extreme Performance DDR2 800 (2x2gb)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820220227

(2) Evga 8800gts or (2) 2900xt if performance is better
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130071

Thermaltake Armor Case
http://www.newegg.com/Product/Product.aspx?Item=N82E16811133154

Thermalright Ultra 120 Extreme cpu cooler
http://www.newegg.com/Product/Product.aspx?Item=N82E16835109140

Please feel free to make suggestions on any and all components.
 
Why the $200 PSU for just one 8800gts, plan on going SLI someday?
 
Hello,

Here are a couple of suggestions and things to think about:

1) If you're going to build now, go Intel Core 2 Duo. AMD is still months away from releasing Barcelona, and it would be foolish to buy an inferior architecture now in hopes that AMD's Barcelona will 1) have an advantage over Intel's next offering (which many don't believe will be the case) and 2) will be compatible with the AM2 motherboard you buy now. The C2D 6420 has proven itself to be a great, overclockable chip that provides a lot of performance for the money.

2) Why SLI or Crossfire on an 8800GTS or equivalent card? First, almost all benchmarks show that a single 8800 GTX card will beat two 8800GTS cards in SLI, and considering that released benchmarks show the HD2900XT to relatively match GTS 640 performance, why not save some money and just get a top of the line 8800 GTX card? Second, SLI or Crossfire is only worth it if you're gaming on a 24 or 30 inch monitor, as the primary benefit they bring is the ability to push a lot of pixels. If you're gaming at 1600x1200 or less with a current-gen card, then the second card will sit idle twiddling its thumbs. If you're gaming on a large monitor and have a large budget, then by all means get SLI, but go with 8800 GTX cards. Otherwise, buying a single card will not only save you lots of cash but give you more motherboard options.

3) If you are going with 4 Gigs of memory, then be prepared to run a 64-bit OS. 32-Bit Windows, due to hard-line technical limitations, will only see 3.2 Gigabytes at max. Note that actual amount Windows 32-bit sees is dependent on the amount of component memory you have installed (i.e. the memory on your video card(s).) Therefore, if you were to buy two 8800 GTX cards and use 32-bit Windows (XP or Vista,) you'd only be able to use 2.5 gigs of your 4 gigs of RAM.

Good luck with the build. As for the motherboard: If you go SLI, get an EVGA 680i A1. If you don't, get a Gigabyte DS3. Both are best of the best for their respective setups. I wouldn't consider Crossfire at all, as 975X boards have significant OC limitations and the R600 cards look to be duds.

Mark.
 
Ok, thanks for the suggestions. I am going to go with the C2D E6420, 8800GTX, and the Gigabyte DS3 (I plan on overclocking, is this board the best to oc with?). I am still going to use the 4gb of Patriot ram even though it won't be recognized because it can't hurt to have 4gb of ram. What psu do you guys suggest since I won't be going sli? I want one that will be able to meet all of my power needs for the next couple of years (2-4).
 
Hi Carnage,

The DS3, featuring the P965 chipset, is an excellent overclocking board. The DS3 is known to support a higher FSB than most any other board on the market. If you're not going to do GTX SLI, then the DS3 is the board to get.

The best source for PSU reviews is www.jonnyguru.com. I would consult that site before buying one. Corsair makes a 520W (and I believe a 600W) modular PSU that is very popular and known to work very well. 750W is overkill if you're not going SLI.

Good luck,

Mark.
 
Ok, thanks a lot for all of your suggestions. I will let you guys know how my build goes as well as oc results and benchmarks. Also, I have read that you need to get a fan to cool the nb chip on this board if you are going to overclock. Is this true and/or necessary?
 
Ok, thanks a lot for all of your suggestions. I will let you guys know how my build goes as well as oc results and benchmarks. Also, I have read that you need to get a fan to cool the nb chip on this board if you are going to overclock. Is this true and/or necessary?

More or less true. It depends on high you want to overclock with relative stability. Personally, I bought the Thermalright HR-05 to replace the stock NB heatsink.
 
More or less true. It depends on high you want to overclock with relative stability. Personally, I bought the Thermalright HR-05 to replace the stock NB heatsink.

I just stuck a 40mm fan on it (I found the fan just layin around here, lol). At stock speeds, it doesnt need one. At 400+ FSB, it needs one.
 
I just stuck a 40mm fan on it (I found the fan just layin around here, lol). At stock speeds, it doesnt need one. At 400+ FSB, it needs one.

Huh. I remember reading that it needed one around 333+ FSB. Then again, I may have read that article while I was half-asleep.
 
Back
Top