It's finally time for a new computer, I've been dragging around this Athlon XP 1700+ box for 3½ years. I will order the parts within two weeks.
Themes: Reliability, durability, low-noise.
I want to build this computer and have it running for years with minimal fuss. Since fans have a tendency to go crap sooner or later, I'm aiming for either passive cooling or low-speed fans for parts. This build will at most see a video card or hard drive replacement, the rest can be assumed to be left static.
Athlon 64 X2 3800+
Abit KN8 SLI
HIS Radeon X800GT IceQ II
4x512Mb PC3200 A-Data, Corsair, Crucial or Kingston. Value.
Seasonic S12-430
Seagate 7200.8 250, 300 or 400 Gb
Some DVD-burner
Antec P180
CPU: Seems like the only X2s around are bundled with cooling. I don't want to mess with the warranty. How is it?
Motherboard: I don't care in the least for SLI, what I'm looking for is passive cooling. The Asus A8N-SLI Premium is another choice but it's 50% more expensive. I haven't yet seen one single opinion on the KN8 SLI so I'm assuming it's just an update on their older boards.
GPU: HIS for their IceQ cooling. I'm looking for a card in this price class. A GTO would be nicer, but I can't find one with good cooling atm. This choice is subject to change, the video card market is on the move currently. I wouldn't say no to a passively cooled card, but most of them are either low-end or expensive.
RAM: Crucial is the most expensive, the others are roughly on the same level. I'm not aiming for overclocking here, the differences between the brands appears small to me.
Case: I've heard of the connector problems with the P180 and some PSUs and motherboards.
http://www.abit.com.tw/page/en/moth...ail.php?pMODEL_NAME=KN8+SLI&fMTYPE=Socket+939
The 24-pin connector looks like it has a good placement. The 12V auxiliary connector lies on the other side of the CPU socket, but it shouldn't be too hard to route the cable, aye?
I'll have a total of four hard drives installed, I'm of the impression that the fan in the Seasonic S12-430 will be enough to ventilate the lower chamber (with some of the venting holes blocked).
I *might* consider overclocking when I have it up and running and can see the temps. It's not a great concern for me.
Note: I'm swedish, there are some restrictions on the stuff I can find.
What do you think of my choices? Any possible problems?
Themes: Reliability, durability, low-noise.
I want to build this computer and have it running for years with minimal fuss. Since fans have a tendency to go crap sooner or later, I'm aiming for either passive cooling or low-speed fans for parts. This build will at most see a video card or hard drive replacement, the rest can be assumed to be left static.
Athlon 64 X2 3800+
Abit KN8 SLI
HIS Radeon X800GT IceQ II
4x512Mb PC3200 A-Data, Corsair, Crucial or Kingston. Value.
Seasonic S12-430
Seagate 7200.8 250, 300 or 400 Gb
Some DVD-burner
Antec P180
CPU: Seems like the only X2s around are bundled with cooling. I don't want to mess with the warranty. How is it?
Motherboard: I don't care in the least for SLI, what I'm looking for is passive cooling. The Asus A8N-SLI Premium is another choice but it's 50% more expensive. I haven't yet seen one single opinion on the KN8 SLI so I'm assuming it's just an update on their older boards.
GPU: HIS for their IceQ cooling. I'm looking for a card in this price class. A GTO would be nicer, but I can't find one with good cooling atm. This choice is subject to change, the video card market is on the move currently. I wouldn't say no to a passively cooled card, but most of them are either low-end or expensive.
RAM: Crucial is the most expensive, the others are roughly on the same level. I'm not aiming for overclocking here, the differences between the brands appears small to me.
Case: I've heard of the connector problems with the P180 and some PSUs and motherboards.
http://www.abit.com.tw/page/en/moth...ail.php?pMODEL_NAME=KN8+SLI&fMTYPE=Socket+939
The 24-pin connector looks like it has a good placement. The 12V auxiliary connector lies on the other side of the CPU socket, but it shouldn't be too hard to route the cable, aye?
I'll have a total of four hard drives installed, I'm of the impression that the fan in the Seasonic S12-430 will be enough to ventilate the lower chamber (with some of the venting holes blocked).
I *might* consider overclocking when I have it up and running and can see the temps. It's not a great concern for me.
Note: I'm swedish, there are some restrictions on the stuff I can find.
What do you think of my choices? Any possible problems?