New build - No video...

Boneyard

n00b
Joined
Sep 6, 2007
Messages
3
Bought everything I needed to put together a PC from NCIX.com. Tried to put it together this weekend and encountered a problem. Mounted the CPU, the heatsink, the video card, ram, and the Power supply. When I power it up there is no video or beeping. The LED on the mobo lights up, the fan on the heat sink and video card spin, but that's it.

Here are my specs:

Corsair CMPSU-620HX 620W
ASUS P5K Premium WIFI-AP ATX
Scythe Ninja Plus REV.B
Corsair XMS2 TWIN2X2048-6400C4
EVGA E-GEFORCE 8800 Ultra
Intel Core 2 Quad Q6600

Other parts:
Antec Nine Hundred
Microsoft Windows Vista Home Premium
Seagate Barracuda 7200.10 500GB SATA2
Samsung SH-S183A Black SATA DVD+RW

Now here is all the trouble shooting I've done. I've tired a different monitor, and hooking up a speaker. I'm sure everything is wired correctly, and yes, the video card has it's two power cords plugged in. I assembled everything in the case, then took it out and tried on the mobo box. I've tried the ram in every possible combination. Including no ram and one stick. I've tried the other PCI-E slot for the video card. I've taken out the battery and reset the BIOS. Still no video, no beeping.

I'm pretty new to assembling computers and this is the first one I've done. I'm running out of ideas, so any help would be much appreciated. Thanks.
 
ok this could be a few things but start here:

make sure the RAM, CPU and videocard are all inserted all the way properly in the correct position. The CPU has a corner you match up with the socket. Also make sure you have some thermal material between the heatsink and the CPU. If you used the stock CPU cooler it has a thermal pad so you don't have to worry about paste. Make sure you peeled off the plastic before you attach it to your motherboard.

Make sure all the power connectors are properly inserted. On the motherboard there are two power connectors, the 24pin one(long and white) and a 4pin CPU connector (square and white). Make sure both of those are connected from the power supply to the motherboard.
Do that and check back with us.

Do that, try to boot and check back.
 
I think I've got both power connectors into the mobo properly. But I'll double check that.

I'll try to reseat the cpu. I am using the Ninja heatsink and I applied the thermal compound so will I have any issues removing the heat sink and putting it back on? Will I need to reapply some thermal compound? Also if the thermal compound is touching the cpu holder on the mobo is that a problem?

This kind of a noob question, but, both the mobo and video card came with stickers on the back of them, on the circuit board side that says "warranty void if removed" and some stock/sku numbers. Seems like a long shot, but could that be the cause of any problems? Are they suppose to be there?
 
This kind of a noob question, but, both the mobo and video card came with stickers on the back of them, on the circuit board side that says "warranty void if removed" and some stock/sku numbers. Seems like a long shot, but could that be the cause of any problems? Are they suppose to be there?

No they wont be causing the problems and yes they should be there.
 
Yes, try re-seating the CPU.

Yes, you will have to reapply the thermal compound. Clean the "old" stuff off with a coffee filter and some 90% Isopropyl rubbing alcohol. Follow the directions on the ArcticSilver website for applying the thermal compound: http://arcticsilver.com/instructions.htm

FYI, newer CPU/HSF retail boxes from Intel and AMD no longer use thermal pads. They all use thermal paste now, pretty much ever since the Prescott CPU (oh, about 2 years ago).
 
No luck with re-seating the CPU. I phoned NCIX.com technical support and the guy seemed to think the mobo is the problem. He had me package up the mobo, CPU, and RAM to be sent back to them. So by the time it gets there and back it'll be like two weeks before I have my computer working. I think I'll buy local next time. Ah well.

But thanks for the help guys. I'll probably throw up some pictures when I get everything assembled and working.
 
I had the same problem with the exact same motherboard and then sent it back to Gigabyte. I'm getting another one from Newegg while they look at this so you're not the only one with this problem on this board.
 
I had the same problem with the exact same motherboard and then sent it back to Gigabyte. I'm getting another one from Newegg while they look at this so you're not the only one with this problem on this board.

But the OP has an Asus. Why would you send it back to Gigabyte?

ASUS P5K Premium WIFI-AP ATX

I'm not sayin you guys are alone... every manufacturer/board has its share of bad batches.
 
Let's look at the monitor. Do you have it set to automatically detect an input, or DVI only? I'm wondering if it's set for VGA (analog) only and you're not getting a picture because the card is using DVI out. Have you tried using the adapter (if the card came with one) to connect the card to the VGA input?
 
Back
Top