Bought everything I needed to put together a PC from NCIX.com. Tried to put it together this weekend and encountered a problem. Mounted the CPU, the heatsink, the video card, ram, and the Power supply. When I power it up there is no video or beeping. The LED on the mobo lights up, the fan on the heat sink and video card spin, but that's it.
Here are my specs:
Corsair CMPSU-620HX 620W
ASUS P5K Premium WIFI-AP ATX
Scythe Ninja Plus REV.B
Corsair XMS2 TWIN2X2048-6400C4
EVGA E-GEFORCE 8800 Ultra
Intel Core 2 Quad Q6600
Other parts:
Antec Nine Hundred
Microsoft Windows Vista Home Premium
Seagate Barracuda 7200.10 500GB SATA2
Samsung SH-S183A Black SATA DVD+RW
Now here is all the trouble shooting I've done. I've tired a different monitor, and hooking up a speaker. I'm sure everything is wired correctly, and yes, the video card has it's two power cords plugged in. I assembled everything in the case, then took it out and tried on the mobo box. I've tried the ram in every possible combination. Including no ram and one stick. I've tried the other PCI-E slot for the video card. I've taken out the battery and reset the BIOS. Still no video, no beeping.
I'm pretty new to assembling computers and this is the first one I've done. I'm running out of ideas, so any help would be much appreciated. Thanks.
Here are my specs:
Corsair CMPSU-620HX 620W
ASUS P5K Premium WIFI-AP ATX
Scythe Ninja Plus REV.B
Corsair XMS2 TWIN2X2048-6400C4
EVGA E-GEFORCE 8800 Ultra
Intel Core 2 Quad Q6600
Other parts:
Antec Nine Hundred
Microsoft Windows Vista Home Premium
Seagate Barracuda 7200.10 500GB SATA2
Samsung SH-S183A Black SATA DVD+RW
Now here is all the trouble shooting I've done. I've tired a different monitor, and hooking up a speaker. I'm sure everything is wired correctly, and yes, the video card has it's two power cords plugged in. I assembled everything in the case, then took it out and tried on the mobo box. I've tried the ram in every possible combination. Including no ram and one stick. I've tried the other PCI-E slot for the video card. I've taken out the battery and reset the BIOS. Still no video, no beeping.
I'm pretty new to assembling computers and this is the first one I've done. I'm running out of ideas, so any help would be much appreciated. Thanks.