New Build... no video output... help!

Tom B

n00b
Joined
Jul 29, 2007
Messages
62
I connected together the CPU, Motherboard, GPU, RAM and Video card and get no output on the monitor.

Hardware:

Motherboard: EVGA 680i SLI
CPU: Intel Q6600
GPU: BFG 8800GTX OC2
PSU: Corsair HX 620w
RAM: 4gb OCZ Reaper PC2-6400 (2x2gb)

I'm leaning towards the problem being the video card, but here's what happens when it boots.

All the fans come on, including the one on the graphics card.

Goes thorough all boot codes on the LEDs to 25 Shadow VBIOS - Shadow System/video BIOS" where it beeps for several seconds (although the number keeps going up, so not a fatal error). Note: it may start beeping at 26 - "Clock: Gen Init onboard clock generator and sensor"... it changes so fast i cant really tell.

After a few seconds it pauses at 7F POST Error Check - Check POST error and display them and ask for user intervention

However there is still nothing being displayed on screen.

I tried moving the video card to the 2nd PCI-E 16x slot, same problem.

The computer is still responding. The 7F error is waiting for user input. If I connect a keyboard and press F1 it will go to FF, so it's a display issue, right?


I have no compatible hardware to test with but I tried both sticks of RAM on their own and in different slots. I tried 2 different screens which both work on other PCs and both DVI outputs on the video card.

I have no other PCI-E cards or motherboards I can try testing on :(

Am I right in thinking the video card is dead?
 
I'd put my money on the mobo being screwed up, with all those messages about the bios and system clock. the gpu obviously isn't completely fried, so that wouldnt' cause a post error.

perhaps evga tech support might help you clarify those beep codes further?
 
Tom B.,

My son and I tried to put together a similar system last night, and the identical result happened to us!

EVGA 680i Motherboard

BFG Tech Nvidia GForce 8800 GTS OC PCI-16 Graphics Card

2 x 1Gb Corsair XMS2 DDR2 Matched RAM sticks

Please respond back if you found a solution!

It's especially frustrating because there is no video display to give you any clues. I integrated many other systems in the past myself, so I know what I'm doing!!

Thanks,

Jon H.
 
I bought an inexpensive PCIe x16 graphics card (coincidentally, an EVGA e-GeForce 7200 GS) to test the EVGA motherboard.

It worked. We now have video display.

SOOOOO...

Either the BFG Graphics card is 1) Defective, or 2) Incompatible with this motherboard.

We will begin figuring out which of the above is correct.

Regards,

Jon H.
 
This may sound like an obvious suggestion for both Tom and Jon, but I'll throw it out there anyway. You guy's have the PCI-E power connections hooked up to your cards right?
 
Crashthenet44:

Very good advice, but that wasn't it.

We called BFG Tech Support. Because we tested the PCIe slot with another card and it worked, BFG said just exchange the 8800 GTS card at Fry's (where we bought it), because it is probably bad..

The new 8800 GTS card worked just fine..

Sooo... if you are experience the problem as above, it is probably the BFG card. All it takes is for one little component on this big honking card to go wrong, and poof!, no video display.

That's All, Folks!
 
Back
Top