New build, BSOD under certain circumstances..

m4dioses

Weaksauce
Joined
Feb 27, 2007
Messages
99
Hello, I recently built a new rig with the following specifications;

Gigabyte EP43-DS3L
Q6600
VisionTek 4870
Corsair 520
2x 2GB G.Skill DDR1000
2x WD 640
Vista Ultimate 64bit

... I've run memtest on each individual stick for 10 hours, then together for 24.. no errors, 100% pass.

I've run prime95 for 24 hours straight, flying colors.

Here's the situations when the PC will crash, (it BSOD's or goes to a complete black screen)

1. While playing WarHammer online, if I alt tab and browse the web - the screen will go flat black and I'll have to do a hard shut off. After doing this, windows will NOT boot until I turn the rig off for 30+ seconds, (if I don't turn it off, it loads to the 'Windows has experienced an unexpected shutdown, please choose how to boot, then goes from that screen back to the solid black one, sometimes it will BSOD with atimkdag.sys instead of a solid black screen)

2. Coming out of Gigabyte's energy saver mode, I will BSOD EVERYTIME with the error relating to cdd.dll, which I found out is Microsoft's Canonical Display Driver. When this happens, again I will have to do a hard shutdown or the same error occurs where it'll get to the Windows has experienced an unexpected shutdown screen and go to a solid black screen or freeze when the vista logo pops up. After doing this once, the error is always atimkdag.sys)

3. Sometimes it will randomly crash with IRQ Less Than BSOD relating to the atikmdag.sys file.

I built my wife a similar rig (e7400, gigabyte ep43-ds3l, sapphire 4850, 2x 2gb gskill ddr2-1000 and vista 64 ultimate), she also experiences the atikmdag.sys bsod's randomly, but mostly in TF2.

I'd love to believe it's the video card memory but I'm unsure as my wife is experiencing a similar problem. I've downloaded the latest chipset drivers from Gigabyte and installed them, I have not flashed the BIOS yet. Also, the latest ATI drivers are installed as well as the latest Catalyst. I've narrowed it down to video related, or at least I'm hoping so.

Also, quick question - will NewEgg cross ship video cards? If not, I guess I'll have to purchase another one and send this one back for a full refund.

Any help is greatly appreciated, thanks in advance.
 
Oh yeah, also I can't raise the FSB higher than 275 or neither system will boot. Shame since I bought two Xigmatek's for OC purpose and I'm just using them as stock coolers, lol.

EDIT: Also, some other things worth noting;

I've played WarHammer Online for 2 hrs straight, all settings maxed, no crashes.

I've encoded video, while running prime95, no crashes.

I've played TF2 for 4 hours straight, all settings maxed, no crashes.

The BSOD's are only experienced under the circumstances I mentioned - but that doesn't make them any less annoying.

For my wife, they're completely random.
 
Did you overclock your Q6600? If so, try to upp the PCI-E voltage, FSB voltage, MCH voltage, etc. Also you might want to get a stronger power supply to test out.
 
I can say that the first issue you are experiencing is a known bug in Warhammer Online and not your rig. While I haven't experienced it myself or even have played the game yet, I have been reading a lot about it. Basically what it is if you ALT Tab out during an animation it'll black screen crash. There have been reports of people waiting 15-20 minutes and it comes back which can be quicker than restarting if your server has queues.
 
All settings are stock, the Q6600 is running @ 9x266, voltages and timings are all stock as well. I do not have a stronger PSU to test and honestly hope that isn't the issue as everyone I asked believed the PSU would be more than enough to power the system. :/
 
I started the following thread because of seeing a lot of similar posts like this
all over the net.
http://www.hardforum.com/showthread.php?t=1350230
Please jump in and comment.
GIGABYTE GA-EP45-DS3L vs EP43 vs GA-EP35-DS3L, Q6600, etc...
Some say the latest BIOS helps.
Please let us know what you do to fix the problem or anything else
you discover.
Random BSODs would drive me nuts. The machines I have
built for 20 years have been rock solid -- but not before a lot
of research. I have seen other rigs do what you describe and
you can put a ton of time into troubleshooting them. Can
you check your temps on things too?
 
I ended up downloading all new chipset drivers and putting them on a flash drive to not use Gigabyte's CD after formatting, (audio, lan, inf) I then flashed my bios to the latest revision. Once I flashed my bios, I wiped my drive and re-installed Vista 64. I haven't had any of the issues. For my Wife, I flashed her bios and and used driver cleaner on the ATi Card then re-installed the same drivers again. ( I used DriverCleaner prior to installing it hte first time too, but w/e).


Both computers are solid now, no crashes, bsods, lockups.. and sleep state works! I can also overclock now (bios flash helped there, I'm guessing) both PC's are overclocked and online now.
 
Back
Top