New AMD roadmap, still not looking good

I love it, people think R700(RV770) is coming out in a few months, but AMDs own roadmaps say its going to be closer to 2009. What the fuck AMD. deneb is only going to bring them up to to even with kentsfield and maybe yorkie, by the time its out in any tangible amount, intel will have nealam(sp) pretty much out there.
 
http://www.computerbase.de/news/hardware/prozessoren/amd/2008/februar/details_amd_deneb_propus_heka/

translated: http://translate.google.com/transla...details_amd_deneb_propus_heka/&hl=en&safe=off

These are the new roadmap slides from late February 2008.

The last slide on that page claims Deneb production isn't until Q4 2008 (the top slide shows it straddling 2008/2009), and R700 is still on the 2009 platform slide.

It's strange, because all rumors point to a R700 release near the Summer. If this roadmap is indeed correct, then Kyle will need to wear the pink tutu afterall...
 
That's just the platforms roadmap. R7xx is still on track for summer.
 
I love it, people think R700(RV770) is coming out in a few months, but AMDs own roadmaps say its going to be closer to 2009.

That's just the platforms roadmap. R7xx is still on track for summer.
Yep, everyone including Kyle is stating this. There is absolutely no reason at this time to assume R700 will be released beyond this summer. I haven't noticed any rumors about a delay, and there usually would be a fair amount of chatter about something like this by now. If there is a delay I don't expect it to be more than a few weeks, not two quarters.
 
Been a long time AMD supporter, Man I wish they would hurry up and get back on the pony here. We need competition across all things.
 
Been a long time AMD supporter, Man I wish they would hurry up and get back on the pony here. We need competition across all things.

i have been one since the slot A days and the dark side is looking tempting
 
i have been one since the slot A days and the dark side is looking tempting

I have been as well, but I'm already on the backorder list for a Q9450. I just can't deal with the bullshit anymore.
 
It's strange, because all rumors point to a R700 release near the Summer. If this roadmap is indeed correct, then Kyle will need to wear the pink tutu afterall...
Oh snap. What was the claim he made again?
 
but i have sided with AMD long enough to know that this is typical

I was agreeing that I have been a supported of AMD since Slot A as well. Hell, I still support them. But it doesn't mean that I can't give up on them for my next system...or two.

Just because bullshit is typical doesn't mean it's fun to justify
 
i am happy, i am getting a MA770 board for my athlon X2 6000 and now i can upgrade to something nice.
 
Every slide shows R700 Generation in 2009 or late 2009-2010 listed in the GPU row.
 
i have been one since the slot A days and the dark side is looking tempting

I too have considered the dark side again.

However, I ask you to look at the motherboards for intel. Ahh.. no choices. 2-3 are great boards, the rest have compatibility issues, and in general the amd boards offer more expansion and interface with old and new devices. Also, some of the best amd boards can be had for under 100 dollars.

Also, amd doesnt care about the board speed wise. you will game the same on a foxcon 60 dollar board as a dfi 250 dollar board (without overclocking and volting). intel still does not have an on die mem controlller and so every board that costs mega bux is normally a much faster board.
 
However, I ask you to look at the motherboards for intel. Ahh.. no choices. 2-3 are great boards, the rest have compatibility issues

Wait a minute, am I reading this properly? You are claiming that out of all boards manufactured for Intel CPUs, ther are only 2-3 that don't suffer from compatibility issues?
Guess I must have really lucked out with my P5B Deluxe then!

In other words: please elaborate on this, because I think you mean to say something else than what you're actually saying.
My guess is that either you have very uncommon demands for your motherboard, in which case you should list them here... or you are using the term 'compatibility issue' incorrectly for motherboards that lack support of feature X (eg, SLI, BlueTooth, parallel ports, etc).
The correct use for the term 'compatibility issue' is when a feature is supported, but not working properly under normal conditions.
 
Wait a minute, am I reading this properly? You are claiming that out of all boards manufactured for Intel CPUs, ther are only 2-3 that don't suffer from compatibility issues?
Guess I must have really lucked out with my P5B Deluxe then!

In other words: please elaborate on this, because I think you mean to say something else than what you're actually saying.
My guess is that either you have very uncommon demands for your motherboard, in which case you should list them here... or you are using the term 'compatibility issue' incorrectly for motherboards that lack support of feature X (eg, SLI, BlueTooth, parallel ports, etc).
The correct use for the term 'compatibility issue' is when a feature is supported, but not working properly under normal conditions.

yes i mean features not supported. as a hobbyist, i use things that require parallel ports or serial ports. I also use firewire. esata and no other ports besides 400430 usb ports are really useless, although esata might be interesting down the road. I would even utilize firewireB but only Gigabyte has to supported that and mostly on boards found in Australia. Expansion slot combinations on the "good" intel boards, (aka, 3 of them) are not flexible in their positioning. It looks like all boards are designed for either someone who hardly has any expansion needs, or designed for someone that wants to SLI which is less than a 1% of gamers in the world. For all of that you get the honour of paying 50-100 dollars more for the board!
 
You should just give up on parallel/serial ports, and use USB or ethernet converters. AMD motherboards may still support them simply because their chipsets are a generation older. They too will disappear soon, if they haven't already.
I actually work at a company that has developed its own COM-to-ethernet interface, because that was the easiest and most reliable way to interface with RS232 devices. Those onboard COM ports may look cute, but they're generally really poor quality, both electrically, and performance-wise. Only industrial COM interfaces with their own processors have good reliability and don't demand a lot of CPU-power.
 
Back
Top