New 9800GTX Not Working Correctly?

naxos

n00b
Joined
Apr 19, 2004
Messages
60
Hello,

I just put together a brand new system today:
ASUS Rampage Formula
Intel Quad Q9450
4GB G.Skill 1066
eVGA 9800GTX SSC

Quick note on the install - The only BIOS setting I have changed so far is I changed the DIMM frequency from AUTO to 1066 per the manual. I Also put the cpu fan on AUTO on the Optimal setting. Thats it - no overclocking, nothing yet.I installed all the ASUS drivers/apps on the Rampage disc. I downloaded the newest drivers from NVIDIA (May 16) and my idle temp on my proc is right around 26-27...having trouble getting a full load reading on it though because it crashes when i start gaming.

Everything working fine in windows. But I'm having terrible difficulty getting games and graphics to work correctly. I installed Crysis thinking this system could put up some nice graphics there but during the second or third cut scene the graphics flicker and show flat textures across the entire screen at that point I ctrl alt del and got out of there I asked it to auto select my settings - it chose HIGH and I had it at 1280x10 resolution without AA on at all.

I rebooted and ran 3DMark06. At the end it did the same kind of full screen of strange colors and then it concluded its test and I had the message box waiting for me:

"nv4_disp Display driver Stopped..." - reboot your machine to use it again.

Did I get a bum graphics card? Any help would be greatly appreciated - I wanted this bad boy to rip!
 
try using an older nvidia driver, just the last one they had for april. see if that changes anything.

also, what psu are you using?
 
I have installed the older driver that came with the card. And I have a Corsair HX620Watt

I started crysis this time and the graphics had a horizontal line across the bottom third kind of flickering, the graphics popped a few times with other colors then the video froze all together then I got a blue screen along with a reboot.

I talked with evga tried a few things and they said it could be system memory or a hardware problem with their card.

I have 2x2gb G.skill DDR21066. I changed the DDR Frequenccy in the bios to be 1066 but left everything else as auto. The evga guy mentioned it may be the voltage is off and i need to set it in the bios for those sticks. SiSoft Mainboard info tells me the Memory DC Line for each is at 1.8V and I think these sticks are supposed to be 2.0-2.1v? At least thats what newegg says...can anyone confirm i need to manually set this stuff in the bios?

Thanks!
 
you can try changing the volts to your memory in the bios, but it sounds to me like you should rma the card. sorry. of course, if it were me, i would certainly play around a bit more before doing so.

i would try the mem volts (which sounds unlikely). have you used that psu for awhile? it's a great model, but if it is also new, it could also be the problem.
 
Its a brand new PSU.

How would I be able to test that out? I would have to buy another PSU to try in its place?
 
no other psu's lying around? what about a cheapo vid card to run 3dmark with?
 
Nah Unfortunately my other computer is an old AMD/AGP/Small Form Factor :(
 
Trying Crysis with only 1 DIMM in now..if it still messes up i'm going to put both in again and set the voltage in the bios and test that out.
 
First off thanks for all your help - in both threads :)

Secondly looking at my bios hardware monitor its saying the DRAM Voltage is 2.192. Is that appropriate for a module that is listed as 2.0-2.1V?
 
no problem. with the hs/fan. don't bother with a bracket. your temps are good enough showing that your hs/f is making good contact, i wouldn't throw money at something you don't need.

back to this issue.... try running cpu-z. go under the SPD tab. what speeds does it show for your RAM and at what volts? your mobo really should get this right on auto settings, but if not, you will see what to set the bios at manually yourself.
 
Here is my CPU-Z.

I guess I look at the EPP column? If thats the case - the volts are correct?

cpuzmx2.jpg
 
yup, looks right to me. you could try backing down to 400(800ddr2 actual) at 1.8v and see if it does anything. you said you did change it to 1066 in the bios. did you try running crysis with nothing at all changed? those would be my last two attempts if i were you. this really doesn't seem RAM relateed to me, but i could be wrong.
 
Damn. I just got a Blue Screen while browsing the web :(


Could that still be the graphics card?
 
yup, looks right to me. you could try backing down to 400(800ddr2 actual) at 1.8v and see if it does anything. you said you did change it to 1066 in the bios. did you try running crysis with nothing at all changed? those would be my last two attempts if i were you. this really doesn't seem RAM relateed to me, but i could be wrong.

I didnt change the settings at all in Crysis 1280x10 res and whatever it determined was the right settings...but this blue screen in XP troubles me.
 
that's interesting. no that doesn't seem likely to be cause by the gpu. maybe it is RAM. try EVERYTHING default in the bios.

recall the bsod error? anything about nv driver?
 
that's interesting. no that doesn't seem likely to be cause by the gpu. maybe it is RAM. try EVERYTHING default in the bios.

recall the bsod error? anything about nv driver?

I don't it flashed too quickly. I'm restored the bios defaults and I'm restarting.
 
I have turned off the restart automatically so hopefully if i get another one I'll get more info.
 
Back
Top