New 2400+ Mobile OC results

L

laws_69

[H]ard|Gawd
Joined
Jul 14, 2000
Messages
1,753
Built a secondary system out of:

Shuttle AN35N Ultra
AMD 2400+ Mobile XP
2 sticks of 512mb DDR (spares, non-matching.... one is OCZ 2700, other is Corsair XMS 512 3200 c2)
New case ---> Enermax Titanium (l33t shit, I must say)

Overclocking is really nice with this board, I don't have to clear bios with jumper NOR hit INS like a madman when it fails. I immediately dialed the bitch up, changing multipliers like gears on a Ferrari.

Ended with: 13.5 x 266 fsb (haven't even started touch fsb yet :) )

2.25 ghz out of a 2400+ processor isn't bad at all, I'd say. Best part is, I'm using an old thermalright heatsink I've had for over a year and the temps are below 40C for CPU and below 35C for case. Voltage is currently set to 1.7 and it is very stable.
 
Because I spend too much money on computers :(

I spent a grand total of $380 on the new system and I'm overjoyed at how much performance I got out of the 2400+ with only a VERY low db Pabst fan on an oldschool copper heatsink. I absolutely love the case, very well built (and very well thought out design/concept).
 
Yes i concure! Heheh... my m2400 ran run paint at 10x280! :p highest mobile ive been was 3.1ghz or so by a man named charlie the dry ice jedi at xtremesystems.org
 
Yup. When I get some better ram (in preparation for the a64 939 purchase this summer), I'll run that fsb dry :)
 
i like my 2400+

3079mhz.gif


http://www.fastlanehw.com/reviews.php?i=102
 
WTF, how did you get a 15 multi?
Every time I try 13 it turns into 6, and it goes up from there.
 
Originally posted by laws_69
Built a secondary system out of:

Shuttle AN35N Ultra
AMD 2400+ Mobile XP
2 sticks of 512mb DDR (spares, non-matching.... one is OCZ 2700, other is Corsair XMS 512 3200 c2)
.
Click to expand...

Lose the OCZ crap 2700. Set the FSB to your PC3200's speed of 200mhz FSB. Set Multiplier at 12. Set Voltage@ 1.8v. Voila! 2400Mhz and don't be scared of it. Works fine if you do the above. Get yourself another stick of that 512MB Corsair. Then you will be flying.
 
Originally posted by NewBlackDak
WTF, how did you get a 15 multi?
Every time I try 13 it turns into 6, and it goes up from there.
Click to expand...


Flash the newest bios, some multipliers were added
 
Originally posted by SnowBeast
Lose the OCZ crap 2700. Set the FSB to your PC3200's speed of 200mhz FSB. Set Multiplier at 12. Set Voltage@ 1.8v. Voila! 2400Mhz and don't be scared of it. Works fine if you do the above. Get yourself another stick of that 512MB Corsair. Then you will be flying.
Click to expand...

THx Newbie Cheeze...I wasn't asking for help though. This is just first day results. As a "second computer", it doesn't get the "omg I have to buy a new stick of ram today" treatment.
 
You must log in or register to reply here.
Back
Top