Network file transfer 100% CPU thread (Onboard NIC)

JWeavis

[H]ard|Gawd
2FA
Joined
Aug 11, 2000
Messages
1,723
Had trouble coming up with the title, hope I can explain it a little better.
System - 2500k, MSI P67A-GD65, 8GB, On board Realtek (2/16/11 drivers)

When transferring files across my network (gig>gig switch>gig NAS server) the system is slowing down to the point the cursor is jumpy and delayed clicking (5-10+ seconds). I normally run Folding@Home on SMP and GPU. When stopping F@H, I still see the 3rd thread of the CPU pegged @ 95-100% when transferring files, but Task Manager shows 98% CPU to System Idle.

Being that this has to do with networking, F@H, and the MB, I chose to put it here as I still don't think copying a file should use a full 4.2GHz core.
 
Does this happen if you were to reboot and not run F@H?
I have a 2500k and realtek, and 16mbit transfers run at about 7%

I also have a Killer 2100 NIC, which offloads all of the processing to a dedicated processor.

If you're really pushing the limits of a GbE, I'd say that could account for a good bit of cycles, but it seems like you have something else going on.
 
Also, and this doesn't happen with my AMD systems, -- I get a slide show on the desktop when running a 100% CPU + GPU load. This doesn't happen with my Athlon II 640/785 MOBO when running FurMark and Prime 95.
 
I would suspect some sort of driver issue. Maybe try newer (or older) drivers?
 
try the older drivers: 7.37.1229.2010

also, bring up the process manager and see what's pegging the cpu when transferring the files.

maybe try safe mode with networking support as well
 
I think a process isn't closing down properly.
Try it in safe mode/w networking or MSCONFIG
 
I will try it in safe-mode.

In Resource Monitor, System Interrupts is pegging the 3rd CPU every time. Happens with Windows Copy and also when using Teracopy.
 
Back
Top