Neo4 Platinum SATA Failures?

Bluemagic

Weaksauce
Joined
Jan 27, 2005
Messages
107
I'm using the rig in my signature and every time I play WoW, about 30 minutes into the game I get a BSOD. After rebooting I go into the event log and I have about 10 of these errors:

Source: nvatabus
EventID: 4
Description: Device slot returned an invalid status value. See data for detailed information.

From what I can gather from different forums, this appears to be some issue with the sata drivers for the SiI3114 RAID controller thats built into the mobo. I tried getting updated drivers from SiliconImage's website but Windows doesn't like them and won't install them. Just for fun I ran memtest overnight and had 26 passes and 0 failures, and I can play HL2 DM for hours on end without any problems; it seems it's only when I play WoW...perhaps because it probably uses the hard disk a lot instead of loading everything into memory? Anyone else experience anything like this?
 
Crappola,

I was going to get this motherboard to replace another motherboard I'm having HDD drops with.

I don't know if you've tried, but try using different SATA ports with no RAID. I've tried it on my mobo to no avail; maybe it will work on yours?

G'luck.
 
I used that board and the only problems I had were my maxtor 10's being dropped before windows boot and windows locking up at startup with usb things plugged in. I jumped back over the A8N with the new 1007-002 beta bios. I tried flashing my K8N Platinum/SLI to the newer K8N Diamond bios's but with no luck. Still has all the same problems. I didn't have any luck with that board.
 
Going on 3 days with no problems with it, atleast on the new 1007-002 beta bios. I've been restarting every couple hours and I haven't had a problem so far.
 
LittleMe said:
Going on 3 days with no problems with it, atleast on the new 1007-002 beta bios. I've been restarting every couple hours and I haven't had a problem so far.
Any problems with overclocking? The BIOS revision readmes don't say anything about NCQ support, but if all is well I might order today. Pretty impressive that the BIOS has gone through so many revisions when other manufacturers are lagging behind.

Thanks again for posting.
 
Don't know about OCing, have done any of that. But the NCQ appears to be working.
 
Back
Top