Worminater
Gawd
- Joined
- Apr 12, 2004
- Messages
- 1,017
I just recieved my K8N Neo2 nForce 3 Ultra Platinum from newegg yesterday, and I have not had any luck with it so far. I have an Enlight 430 watt psu w/ 18a on 12v rail, which could be my problem (i have read 24a is recommended for this board, but it should at least post?)
Heres how I have narrowed it down:
Neo2 mobo, enlight 430 watt psu, athlon64 3000+ (939), ati rage pro 128 agp card
1gb (2x 512) mushkin DDR400(PC3200)(http://www.newegg.com/app/ViewProductDes...-146-219&depa=1)
I have tried just one stick of ram, and with no keyboards plugged in to even get something on screen...
I used stock thermal goop on stock heatsink, just plopped it on there and went. I have a bfg 6800gt oc I used originally, but feared that it might be drawing too much power, so put the old rage pro in to test with, both give smae thing, and both work unless I fried em putting em in the new mobo.
When I plug the powre supply in, it turns comp on, I tried power button shutting down, and power button turning on, and nothing happens, nothing on screen, just all fans/leds turn on and nothing else. I am guesing its power supply, as 18a on 12v line, but it should at least post w/ old vid card in and nothing plugged in correct? The 4 diognostic leds dont do anything by the way, just blank
Heres how I have narrowed it down:
Neo2 mobo, enlight 430 watt psu, athlon64 3000+ (939), ati rage pro 128 agp card
1gb (2x 512) mushkin DDR400(PC3200)(http://www.newegg.com/app/ViewProductDes...-146-219&depa=1)
I have tried just one stick of ram, and with no keyboards plugged in to even get something on screen...
I used stock thermal goop on stock heatsink, just plopped it on there and went. I have a bfg 6800gt oc I used originally, but feared that it might be drawing too much power, so put the old rage pro in to test with, both give smae thing, and both work unless I fried em putting em in the new mobo.
When I plug the powre supply in, it turns comp on, I tried power button shutting down, and power button turning on, and nothing happens, nothing on screen, just all fans/leds turn on and nothing else. I am guesing its power supply, as 18a on 12v line, but it should at least post w/ old vid card in and nothing plugged in correct? The 4 diognostic leds dont do anything by the way, just blank