Neo2 Plat Memory Issues

thefrick

n00b
Joined
Oct 3, 2004
Messages
60
I bought one of the new 90nm 3200+ a64's along with a MSI K8N Neo2 from monarch about a week ago and finally had a chance to put it together yesterday. The board has been having nothing but problems with the memory (mushkin pc3200) I bought... at first, when I installed the two 512mb DIMMs in the first two memory slots (ie different channels), the board wouldn't even boot; and when I put both DIMMs in the same channel, the board will boot, but windows is EXTREMELY unstable and will crash back to the BIOS after 10-15mins of light use. The latter took me about five hours to figure out... at first I thought it was a PS issue or that the cpu might be overheating, but as soon as I took one of the DIMMs out (leaving only one 512mb DIMM in the slot closest to the CPU), everything seemed to run perfectly.

Is this a symptom of bad memory that I should RMA as soon as possible, or could it just be that the Neo2 doesn't like Mushkin memory? I've heard that this board has become notorious for having memory problems...
 
after the bios update, I'd run memtest on each stick to see if you get errors.. this will help determine if the memory itself is bad..

Also, what settings is your ram at? are you using spd? are you giving the ram enuff voltage if it requires more than default?

Also, another thing to remember is that the memory controller is now on the CPU, so there is a possibility that is where the problem is, and not with the ram, or the board.. A64's are little hard to diagnose memory problems now, since there are 3 places it could be bad..
 
Back
Top