• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Needing a custom i/o shield

R

rokar

Gawd
Joined
Feb 14, 2008
Messages
846
I am in the process of designing a htpc case. But I am running into a bit of a problem. I need a 4 slot i/o shield with the ports turned 90 degrees, so the cards would go in horizontal. Any help would be appreciated. Thanks
 
rokar said:
I am in the process of designing a htpc case. But I am running into a bit of a problem. I need a 4 slot i/o shield with the ports turned 90 degrees, so the cards would go in horizontal. Any help would be appreciated. Thanks
Click to expand...

The one and only "custom" I/O shield I had was made by a machine shop. They charged me almost $100 bucks. It was very nice but the wait was about 3 weeks long and the motherboard fried about 6 months later.. Are you describing an I/O shield or are you talking about your PCI slots on the HTPC case?
 
talking about the pci slots. saw something that could work on DangerDens website. Would require some modding on my part.
 
rokar said:
talking about the pci slots. saw something that could work on DangerDens website. Would require some modding on my part.
Click to expand...

Watch out for the mountain mods part

I used it in my build and the spacing was out of ATX spec, had to mill on it more than I would have liked
 
You must log in or register to reply here.
Back
Top