Need Upgrade/Tips

[fakeng]

Hi, been stalking this forum for awhile now. Anyways I need some tips in improving my water cooling system. Here's what I got:

-----------------------------------------------
What I have:

AMD FX 8350
Corsair 750D
Asus 7970 (air cooled)
Watercool HT 4 (140mmx3)
XSPC 750 kit (XSPC AMD CPU Block, AX360, X20 Dual res. pump)
Line: Generic 1/2" vinyl
Generic stop fittings (2)
xspc & generic .5" fittings (8)
Running 2/3 Gallons of Distilled water.

-----------------------------------------------
What I have in reserve:

10 feet 1/2" generic vinyl tubing
10 feet Primochill 7/16 tubing
(3) 90 Degree Angle G1/4 fitting
(2) 45 Degree G1/4
(1) T fitting
(1) Generic open/close value (for draining)
(5) Generic (swiftech counterfeit?) 1/2" fittings
(3) XSPC g1/4 1/2" fittings
Liang D5 pump (used)
1 small vial of PT Nuke

It was 2 month, I started to noticed a bit of corrosion on one of the generic fittings. (not chrome plated good enough.XSPC pump is starting to make noise.

Anyways If you guys can help on the layout a bit. That might help me. Here's the picture.

 

[*The*Dark*Lord*]

Way way way overkill. A single 120mm rad will be sufficient enough to cool a CPU at stock.

240mm is enough for a single CPU, no need for two 360 rads. Fan direction, just throw three fans intake on the top rad and you'll be good to go

 

[ebduncan]

that is a heck of a lot of radiator for just the CPU.

With a setup like that you wouldn't even need fans.

I'd replace your pump and res with a D5 unit but only because your running multiple radiators.