Need some quick help.

ShepsCrook

[H]F Junkie
2FA
Joined
Feb 16, 2003
Messages
9,544
I've been working on upgrading my main system for a couple of weeks, sadly due to hardware being DOA and delayed shipments it's been longer than I would have hoped.

So my final setup is this:

Intel i7 920
Intel DX58SO2
HD6870
12GB Ram
128GB Crucial SSD
X-Fi Platinum
Seasonic 620W Modular PSU

So I just got the video card in today and get it installed. Everything else has been waiting for it. And I go to turn it on... NOTHING.

The motherboard has everything connected. There are lights on inside. The motherboard has 1 green light, the internal powerbutton is red, and the internal reset button is green. I'm checking the manual to see if there's something I'm missing, but wanted to post here to see if someone has any ideas. No sound, no beeps, no fans turn on. It just sits there like this.
 
When I turn the power switch to the PSU off to let the board lose power for a bit, I turn it back on, the board lights up, but when I hit the chassis power switch, you hear this quick little jolt of power from the PSU, and then nothing This PSU was working perfectly fine just a couple of days ago.
 
Ok, another note. Disconnected the 8pin connection, did a power cycle and the system starts up...
 
look for bent pins on the cpu socket...this seems to be a commom occurance with strange problems..
something shorting...id be taking the mobo out of the case and see if it will fire up with minum install of parts...vid card, 1 stick of ram ,cpu and cooler,keyboard, mouse....
the way you get a surge of power and nothing makes me think of something shorting..
thats a nice looking board and hopefully its not doa...
make sure you clear cmos and if you get into bios make sure your voltages are set to specs for your ram,cpu.....
 
Well, I've currently tested outside of the machine.. With only 24pin, and 8 pin. Does the same thing. I don't see any bent pins in the CPU socket. I don't see any bad solder points.

Luckily, I bought this board locally from CompUSA and can exchange it tomorrow, but this is getting ridiculous with this build.
 
yea if you have looked at all that stuff its looking more and more like a bad board..ive exchanged boards at compusa before here in orlando and they are very good about it...now if we could only get a microcenter here id really be broke...
 
Back
Top