Need some advice,please.

[magoo]

My stuff is running really hot since I SLI'd with 8800GTXs.

I'm thinking of WC my CPU for starters.

I'm a noob's noob with this so I think the Nautilus 500 would be the way to go???

I have an ASUS P5N32-E SLI board, will I need to put some kind of fan on/near the NB???
The Nautilus will replace an ArcticCooling Freezer Pro 7.
I know the heat is primarily from the two big GPU's, but this seems to be a good solution to reduce some of the heat.
I have several 80mm Panaflo fans and a 120mm fan on the side window.

Any one who uses the Nautilus set-up with pros/cons is appreciated.

 

[Top Nurse]

IIRC, a couple of [H]ardForum staff are currently using that kit including Kyle. Hopefully they will join in.

 

[Ranker]

My stuff is running really hot since I SLI'd with 8800GTXs.

I'm thinking of WC my CPU for starters.

I'm a noob's noob with this so I think the Nautilus 500 would be the way to go???

I have an ASUS P5N32-E SLI board, will I need to put some kind of fan on/near the NB???
The Nautilus will replace an ArcticCooling Freezer Pro 7.
I know the heat is primarily from the two big GPU's, but this seems to be a good solution to reduce some of the heat.
I have several 80mm Panaflo fans and a 120mm fan on the side window.

Any one who uses the Nautilus set-up with pros/cons is appreciated.

Used it before.

Pros: Nautilus is probably the best of all kits out there not named Swiftech. It's easy to use, won't require you to dismount your motherboard to install a backplate and posts some decent temps. Doesn't cost an arm and a leg like other kits out there.

Cons: Contains aluminum which allows for the possibility of corrosion. The kit itself does not lend itself towards being upgradeable for this very reason and others. Just like most other kits, the components are proprietary. You could get a better performing kit for a little bit more money by going the custom route.

 

[Top Nurse]

Used it before.

Pros: Nautilus is probably the best of all kits out there not named Swiftech. It's easy to use, won't require you to dismount your motherboard to install a backplate and posts some decent temps. Doesn't cost an arm and a leg like other kits out there.

Cons: Contains aluminum which allows for the possibility of corrosion. The kit itself does not lend itself towards being upgradeable for this very reason and others. Just like most other kits, the components are proprietary. You could get a better performing kit for a little bit more money by going the custom route.

Now that's better Ranker!

I agree except that if you use proper corrosion inhibitors you can get away with a once a year coolant change. Aluminum in the loop is okay so long as you understand what you need to do to keep galvanic corrosion form happening in the first place. If you aren't the kind of person who keeps tabs on these kinds of things then you should try for all copper or copper and silver metals in your loop.

 

[grinchy]

Now that's better Ranker!

I agree except that if you use proper corrosion inhibitors you can get away with a once a year coolant change. Aluminum in the loop is okay so long as you understand what you need to do to keep galvanic corrosion form happening in the first place. If you aren't the kind of person who keeps tabs on these kinds of things then you should try for all copper or copper and silver metals in your loop.

now that makes perfect sense...good job

 

[magoo]

Thanks, noob here......how do I stop this corrosion???? I saw mention of an inhibitor.

Secondly......I'd like an external kit such as the Nautilus.......if there is a better kit that would be good for a knucklehead like me, for cooling the CPU only right now...... I'm all ears........cost of around $200 would be about right.

 

[grinchy]

Thanks, noob here......how do I stop this corrosion???? I saw mention of an inhibitor.

Secondly......I'd like an external kit such as the Nautilus.......if there is a better kit that would be good for a knucklehead like me, for cooling the CPU only right now...... I'm all ears........cost of around $200 would be about right.

for that range the Nautilus sounds right for you...

 

[Ranker]

Thanks, noob here......how do I stop this corrosion???? I saw mention of an inhibitor.

Secondly......I'd like an external kit such as the Nautilus.......if there is a better kit that would be good for a knucklehead like me, for cooling the CPU only right now...... I'm all ears........cost of around $200 would be about right.

Swiftech CPU kit or that kit. Either will fit your budget. Corsair kit is easier to install. Swiftech kit outperforms it and doesn't have any aluminum. However, it is more difficult to install as you'll have to remove your motherboard from the tray.

 

[Top Nurse]

You use corrosion inhibitor. Lots of different types on the market, but some are more problematic than others. I use Aqua Computer AC Fluid and I think the same stuff is available from Alphacool and they call it TEC-Protect IIRC. The prime ingredient is => http://www.chemicalland21.com/arokorhi/specialtychem/perchem/HYDROXYPHOSPHONO ACETIC ACID.htm

 

[magoo]

Swiftech CPU kit or that kit. Either will fit your budget. Corsair kit is easier to install. Swiftech kit outperforms it and doesn't have any aluminum. However, it is more difficult to install as you'll have to remove your motherboard from the tray.

Thanks.....I'm not at all opposed to working on my computer......its just taking the MB off the tray at this point would be truely painful.

Is the swiftech that much better???? If so why do you like it over the Nautalis, other than the Aluminum problem. I'm all ears.

Is this the one???http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=202&products_id=3827

 

[grinchy]

Thanks.....I'm not at all opposed to working on my computer......its just taking the MB off the tray at this point would be truely painful.

Is the swiftech that much better???? If so why do you like it over the Nautalis, other than the Aluminum problem. I'm all ears.

Is this the one???http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=202&products_id=3827

that 1 or this:
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=202&products_id=3828

 

[R1ckCa1n]

If you plan on introducing those 8800GTX's to waterblocks, the Corsair unit is out the window. You will need a system with at least a 120.3 radiator. I suggest looking at newls1 (that is a user on this forum) and inquire about his black external unit.

 

[grinchy]

http://www.petrastechshop.com/newa.html

 

[Ranker]

Thanks.....I'm not at all opposed to working on my computer......its just taking the MB off the tray at this point would be truely painful.

Is the swiftech that much better???? If so why do you like it over the Nautalis, other than the Aluminum problem. I'm all ears.

Is this the one???http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=202&products_id=3827

Because the swiftech kit is more upgrade friendly and has reusable parts in the event you decide to upgrade in the future. Also, in the event one component dies, you won't have to toss the whole unit like you would in the case of the Nautilus. Swiftech's kit is basically a custom level performance kit made of all Swiftech products (obvious).

Not to mention, the first company that usually comes to mind when talking about track record for top performance is usually Swiftech.

They're the only company that offers the whole vertical lineup in terms of components that is competitive against a line up of top performing products across each component.

 

[magoo]

Thanks for all the information!!!!
I'm not ready yet to place waterblocks on my GPUs, and yes I understand the Nautalis unit could not stand up to that much heat!

I guess I'm gonna have to take the plunge and look into Swiftech as it indeed looks more hardcore and just might be more interesting to work with.

I'm still trying to get over the water and electricity in the same vicinity.