• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Need help

R

RavenX

Limp Gawd
Joined
Oct 27, 2006
Messages
320
My current system.

AMD Phenom II X4 965 Black Edition

Prolimatech Megahalems Rev B

ASUS Crosshair III Formula AM3 AMD 790FX ATX

G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel

750 watt pc power and cooling power supply

150 gig raptor hard drive

Sapphire vapor-x 5870

Windows 7 64-bit Ultimate


System specs

FSB frequency: 200
DRAM frequency: 1600mhz
CPU NB: frequency 2600mhz
HT link speed: 2000mhz

CPU: 1.375v
CPU NB: 1.35v
Dram: 1.55v
NB: 1.25v
SB: 1.2v
HT:1.4v
Timings: 9-9-9-24 @ 1.55v

core speed: 3.6ghz
multiplier: x18.0
bus speed: 200mhz

Ok so basically with the above settings, I am Prime95 stable for 8 hours. (haven't tested longer). My goal is to hit 4.0ghz and right now i'm at 3.6. I tried to hit 3.8 by setting the multiplier to x19, but about 5 seconds into prime95, I get a blue screen that was telling me it was dumping physical memory. What i'd like to know is what can I lower/raise on my current bios settings to be able to hit 3.8, then 4.0ghz stable? I'm still fairly new to overclocking and could use some help. Thanks.
 
You must log in or register to reply here.
Back
Top