I just built a new SFF system, a SN41G2V2B with a 2800+ XP. Anyhow the problem I am having is with long post times, it feels like the system moving much slower than it should as you go through the post screen and the accompanying pci device listing screen. I have windows installed on the hard drive, however I just restarted the comp, and now I can't get back to windows, the computer just kind of stalls. What could the potential problems be? If I have the jumpers on the wrong places on the hard drive and optical drive, that could possibly be causing it, however the post screen lists the devices when it detects ide devices. Anyhow, I will be back in a bit, any suggestions would help. Should I flash the bios?
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Need help with
- Thread starter Clear
- Start date
mooseboy84
Weaksauce
- Joined
- Apr 3, 2003
- Messages
- 119
check the jumpers on the hard drive. that may be the problem. i dont have a SFF, but i once tried to boot a new hd with the jumper set on slave. this was plugged onto the master cable and it took FOREVER to boot up. i thought the drive was busted so you may want to go and check the jumpers. it worked after i set it correctly.
