need help with system build

cwilhelm

Weaksauce
Joined
Mar 15, 2007
Messages
89
specs

evga 680i mobo
samsung sata dvd-rw
wd sata raptor 74gb
ocz 2gb platinum 8500

im having a ton of problems trying to install windows with a sata hard drive and a sata dvd drive. the error im getting is "no valid cdrom device drivers selected." however, this is contradictory to me - im using a boot cd for a fresh install of windows xp (with caldera dr-dos) and it gets a few steps into the process which means it obviously finds the drive enough to boot the disk from it but fails shortly thereafter.

sequence is like this.

boot from cd...
...
no drives found aborting installation
...
no valid cdrom device drivers selected

i also thought it was a hard drive problem but my hard drive is fully detected in bios.

ive also tried to boot with a windows xp pro cd with the error message "disk boot error, insert system disk and press enter"

tried with a windows 98 cd and the error message is "no drives found aborting installation" shortly after i go through the windows 98 setup menu and select "boot from cd-rom"

my bios detects both the hard drive and the dvd drive, both are sata. my boot order puts my cdrom drive first - ive tried every combination of this so its not in question.

any help before i throw this thing out the window?
 
First, is this the A1 revision of the eVGA board? If so, Why are you using Caldera? Do you have SP2 slipstreamed into your XP installation disc? If not, get it done. That should solve your issues during installation.
 
I had this same problem back in the fall. I had an Intel DG965wh, and was trying to install vista on a WD SATA HD. I had a Sony CD/DVD drive (IDE), and I got the same error.
I ended up buying a Lite-ON SATA drive and trying again (I had assumed that the Vista CD did not have generic drivers for the drive I had in there). It worked no problem.

So I would try a new optical drive. I know BestBuy has some SATA DVD drives for like $40 right now.
 
Back
Top