need help with mb

SBMongoos

[H]ard|Gawd
Joined
Jul 22, 2001
Messages
1,134
I have an Abit Kt7a RAID mb. I just today rec'd a Maxtor HDD that's 200gb. WinXP says it's 130gb (or 137). SP1 is installed and my BIOS has the latest update which is one update after the 137gb issue update with a HDD. (In other words the BIOS that is supposed to fix this problem is one previous to the one I currently am running.) MY HPT drivers aren't the latest but fairly close. I do have this drive as a slave on my primary RAID controller (no RAID capabilities setup...no need right now).

Can't figure out why my PC doesn't see the whole drive.

Any ideas?

Thanks
 
Ok here are some explanations.

First 137GB is the "technical" max drive size of a FAT32 drive.

So go try and install under NTFS. If that does not work try using a aftermarket IDE card such as a Promise or a SIIG. I've used both and love them.

And test it on a second computer. With XP or 2K
 
I'm running XP Pro now. Everything should be in place. I wonder if overwriting the mb BIOS with the update that specifically handles with 137 barrier will do the trick?
 
I really don't think it's a function of the BIOS as to see what size drive it is. All else fails input the drive manualy. WOW that brings back memories of some OLD Mobo.
 
I'm doing.

1) Reflashing the BIOS w/HPT drivers (older HPT version with LBA issue though)

2) Ran a patch from MS to get the correct 'atapi.sys' file installed to enable XP to see drives beyond 130Gb. According to the MS site I had the wrong version.

3) Update the HPT drivers. I have to do this from DOS and within' Windows. Have never done this from DOS tho'.

This will cover the gambit. Everything was perviously okay except for the version of atapi.sys. Find it odd that SP1 didn't fix this as it was supposed to. I just decided to methodically go through everything to be sure all was up to date. Just have to figure out how to install the HPT drivers from DOS. Windows is easy.
 
After all is said and done the RAID (HPT) controller still think the 200gig drive is only 128gig. I've installed this drive on a non-RAID IDE connector and Windows reports the correct drive size. I have version 2.34 from HPT so this is supposed to include the large (LBA) drive issue over 130gig. BUT, clearly I still have a problem.

Anyone help with this one? Would rather figure it out than buy a controller card I don't want to pay for when I'm looking at upgrades in the relative future.

Thanks!!
 
interested. I figured out the answer.

I was so caught up in getting the BIOS updated and the HPT BIOS updated that I neglected to get the HPT driver in Windows updated as well. This was the problem. The updated HPT Windows driver solved the 137gig barrier. Also, I'm using a swappable drive tray for this drive and it seems I have a power or cable short somewhere (this didn't help). Hopefully I can fix the short and not have to replace the tray.
 
Back
Top