• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Need help with Case

P

pates03

Limp Gawd
Joined
Oct 6, 2002
Messages
254
Hey just finish building a computer with this case enermax and I can't get the side lights to work or the LED on the Front. Has anyone used this case b/c im in a dead end and would like to have the lights working! Thanks !
 
There should be connectors that come out of the metal hole of the case chassis. If not, you should pop the front plastic and check it out.

I have an Enermax case, and if I remember correctly, there are a few screws on either side you need to take out, and two tabs on either side to pop out. Snatch the connectors, hook the bubble cathodes to the inverter (unless they're molex, in which case the inverter might be in between the chassis and the plastic, which I doubt anyway), and take the molex and plug it in to the PSU. And take the connectors for the LEDs and put them on the mobo as instructed by your owner's manual (keep an eye on correct polarity, too).

Oh, and the fan vent on the top kind of sucks (doesn't allow all that much air to go through), so you might want to take a Dremel and cut out a circle and put a fan grill in it that allows more airflow.

Does this help?
 
sort of...but owners manual from my motherboard!??

i have this little cables from the front that has TSB - (something like it) and the wiries are in different colors !

is there any visuals online that can help me?!
 
I have this case and I have gotten the side bubble lights to work, and the display for the temp to work. But I haven't gotten the light up power button to work. When I get home I will post how I have it hooked up. Have you gotten your power button to light up?
 
Originally posted by nwahs000
I have this case and I have gotten the side bubble lights to work, and the display for the temp to work. But I haven't gotten the light up power button to work. When I get home I will post how I have it hooked up. Have you gotten your power button to light up?
Click to expand...

That's just a power LED. If you've hooked up your power LED, and it doesn't light up, change the polarity.
 
You must log in or register to reply here.
Back
Top