Hey there. I'm trying to figure out how to enable or make Thundebrolt 3 working on this laptop.
So far this is what I've done:
Updated bios from usb to 307
I've fresh installed the latest Windows version from MS from usb
I let it do it's automatic updates.
Got the drivers for Thunderbolt and ATK from Asus support
Updated Thunderbolt driver V126.2.52.250
Rebooted.
Ran Asus Thunderbolt Update NVM_v15_TI_v1.5
Worked and rebooted
Tried my egpu or anything usb-c in it and nothing works.
This is what it shows when I run the Thunderbolt software under details:
https://lnv.i.lithium.com/t5/image/serverpage/image-id/144719iFE374CA2B0457947?v=1.0
I see no Controller driver version.
I tried to update TB3 firmware with XG Station 2 2017/07/24 v1.7.6
I get this error from the Asus Firmware screen:
Update Error, Firmware update process is halted (0x10430002).
Checked bios:
Intel Thunderbolt Configuration - Host chip Alpine Ridge
Security Level - Unique ID
And here I am, stuck with no idea if the TB3/USB-C port works at all.
Any help?
So far this is what I've done:
Updated bios from usb to 307
I've fresh installed the latest Windows version from MS from usb
I let it do it's automatic updates.
Got the drivers for Thunderbolt and ATK from Asus support
Updated Thunderbolt driver V126.2.52.250
Rebooted.
Ran Asus Thunderbolt Update NVM_v15_TI_v1.5
Worked and rebooted
Tried my egpu or anything usb-c in it and nothing works.
This is what it shows when I run the Thunderbolt software under details:
https://lnv.i.lithium.com/t5/image/serverpage/image-id/144719iFE374CA2B0457947?v=1.0
I see no Controller driver version.
I tried to update TB3 firmware with XG Station 2 2017/07/24 v1.7.6
I get this error from the Asus Firmware screen:
Update Error, Firmware update process is halted (0x10430002).
Checked bios:
Intel Thunderbolt Configuration - Host chip Alpine Ridge
Security Level - Unique ID
And here I am, stuck with no idea if the TB3/USB-C port works at all.
Any help?