• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

need help with a string of memory problems.

H

hpglow

Limp Gawd
Joined
Mar 2, 2004
Messages
373
Ok I just put togather a A64 system 939pin. I have been having problems getting XP to install but thats not what I'm writing here about. I can't get the board to boot with more than one stick of ram in it before, I've had this board one day. I put the ram in to slots 1 and 3 as the manual asks and it booted fine before. Now if there is more than 1 stick in any of the slots it refuses to boot. Dosn't matter which sticks, if I put more than 1 in I just get a black screen and no post. So basically I'm wondering what I should RMA back to newegg?
 
I would run Memtest on each stick and if they all pass, RMA the board
 
EnderW said:
I would run Memtest on each stick and if they all pass, RMA the board
Click to expand...
Normally I would do just that but here is where I have the hangup. Its with the memory controler being on the processor. Isn't there a possibility that the CPU is bad also in this case?
 
You must log in or register to reply here.
Back
Top