Need help with a KVM switch!

aramis

Limp Gawd
Joined
Feb 8, 2007
Messages
459
I tried googling this and didn't get any solid hits, so I'm hoping you can help.

We have an IOGear Miniview II 4 port USB KVM switch (model #GCS124U) that we just got for the office. It works great in Windows. But in the BIOS or DOS from a boot disk (which we use daily to wipe or ghost machines) the keyboard gets wonky. Any button you press sends multiple commands to the PC. So if I press the down arrow to go through the BIOS, it'll jump clear to the end rather than just going one line down. This holds true with different keyboards, different pc's (though all Dell GX series desktops) and any mode that's not in Windows.

Any suggestions on how to slow down the emulation?
 
I have the 2 port version and don't experience this. Did you ask IOGear? Have you tried another KVM?
 
The only other KVM we have is a ps2 one that doesn't experience this issue, and of course it's a different brand as well.
 
Try a dual ps2 converter into USB on the computer side (USB into the computer). My pops' computer had keyboard/mouse issues through a different iomega KVM and using the "y" ps2 to usb worked good.
 
Try a dual ps2 converter into USB on the computer side (USB into the computer). My pops' computer had keyboard/mouse issues through a different iomega KVM and using the "y" ps2 to usb worked good.

I don't have any adapters, but I will look into that as an option.

I just got off the phone with their "tech support"... quite possibly one of the worst I've ever had. I tried really hard not to lose my cool over it.

1. It was obviously outsourced. She was difficult to understand and when I mentioned time zones and what time it was here (since I was leaving and they want to call back) she was completely lost.

2. She continually tried to have me plug the keyboard directly into the pc and change settings in WINDOWS. That's not going to work because we use the KVM with multiple computers each day, and I can't go and load Windows up when I'm trying to ghost the machine. She seemed to also think the keyboard would somehow magically "remember" the settings when I popped it back onto the KVM.

3. She was really stubborn. When she said "Well we have duplicated this and this was the resolution I was given," I asked to speak with that person, since there was obviously a breakdown in communication. I'm not IN WINDOWS when the problem is happening, dammit! No amount of tweaking in Windows is going to help me when I'm starting into a boot disk DOS environment.

...argh. So again, any and all suggestions would be great. The thing was $200 and I don't want to potentially throw more money at it with adapters that don't always play nice with KVM's.
 
Well, update. Tech support had one of their techs (in-house, as opposed to the outsourced lvl 1 support) call me back.

He understood the problem right away. We tried to duplicate the issue with a usb hub, which would show us if it was a problem with the motherboard's usb ports or with the kvm switch itself. I couldn't get it going at all with the usb hub, which I confirmed to be good when in Windows.

I think there may be an issue with Dell's mobo USB ports (but only in DOS). This conclusion is backed up by the fact that if I have a laptop on a docking station it works ok with the KVM in the BIOS while it doesn't while its by itself.
 
Back
Top