Need help troubleshooting new PC's front USB Ports

fox_91

n00b
Joined
Apr 4, 2007
Messages
3
Just got some new computer parts in:
IN WIN IW-BL631.300BLP Case
GIGABYTE GA-73PVM-S2H Mobo
The other parts I don't think matter at this point.

Anyways, machine is all built and got Vista installed, when I plug devices into any of the front 4 usb ports, i get a "This Usb device is not recognized" error. I thought i might had put the headers on wrong, and flipped them around, but get the same error. Checked votage on headers and get the 5v so i know on the mobo that there is power going to the ports. And the USB ports on the front show 5v of potential so idk if they work.

I am trying to determine if the case's ports are bad or not. Is there anything I can try? or does anyone have any suggestions? The mobo has 3 usb headers each supporting 2 USB. From what I remember the case's ports has 4 pin plugs, +5 -5 VDC and Gnd..

I'm just stumped, and bummed that these ports don't work.Can anyone offer suggestions?
 
It sounds like they're probably just wired wrong. Starting from pin 1 on the motherboard header, it's usually 5v(red), data-(white), data+(green), gnd(black), with the pin above the empty key position not used.
 
Thanks, it's working now, but I swear that I wired it right the first time... didn't work, wired it wrong... didn't work, then went back to the right way, and it worked.... Lost my USB Flash drive in the process however.... damn electricity
 
Back
Top