Need help... no video signal

bobsaget

Supreme [H]ardness
Joined
Jan 24, 2004
Messages
4,403
Hey guys I am having trouble with a system all of a sudden. I had been using this computer for about a year previous to this. I just put the computer back together (it was in parts) and now I turn it on and my monitor isn't getting a signal. It seems as the computer is running just fine. Maybe the video card has gone bad? I tried bare minimum, and two different sticks of ram one at a time.

AMD 1800+
1GB RAM
80GB HDD
9600 Pro 128mb

Anything else I should try before I get a new video card?



Thanks.
 
different monitor and or connector
fan on card spin up?????
analog or dvi????
MB ok????
If it wont show on a bare install it may be DOA. I'd try the video card in anothr working system, too.
 
When you turn it on, you get nothing at all except a no signal message?

Try clearing your cmos. If not, I'd think ram, but you've already ruled that out (or else both sticks are bad....)
 
Does it make and beep codes?
Do you have a internal speaker in you case or on you board to hear them?

Might try taking the video card back out and resinserting it to make sure it seated good.
 
Back
Top