Need help - How much heat is too much?

Vaiks

n00b
Joined
Jul 27, 2006
Messages
50
Folks,

I read a lot in the forum about heat problems, no stock cooling solutions, etc but I have a question: on nvidia's Forceware drivers, the temperature that trigers the alarm is 125ºC.

On the threads, it is usual to read that temps above 80 will demage your card. So what is right? This morning, with a conductive ink pen I volt moded both my 7900GT to 1.4v. I was able to increase the gpu clock to 650Mhz and the memory to 900Mhz (1800Mhz effect). My 100% load temp went fron 67~69 to 75~77 (far bellow the 125ºC) limit.

I'm I on any danger of demaging my boards from extreme heat? Or temps on the 70's are high but ok: "Your case will be hotter, limiting the OC capacity, but no harm will be done."

I was thinking about replacing the stock cooler with a Zalman VF-700 or VF-900, but if I could avoid it, I would prefer.

Thanks in advance.

Vaiks
 
Should be fine. nVidia cards have a process called throttling that will reduce clock speeds should the GPU become too hot. The alarm temperature is, I believe, the core shutdown threshold.

There are devices in place that keep your card from burning out. As heat increases, the GPU lifespan decreases, but shouldn't cause any short term issues. 75-80 is a totally acceptable temperature range. Some ATi GPUs can routinely creep into the low 90's and is a totally acceptable operating temperature range for those GPUs.
 
Back
Top