Need help hooking up a switch

[Trackr]

Hey, I purchased this switch from PPCs:

http://www.performance-pcs.com/cata...oduct_info&cPath=60_374_375&products_id=22162

And this cable to hook it up:

http://www.performance-pcs.com/cata...=27732&zenid=c6a90062da41f3c530dddd73941369a2

Can't. Make. Them. Combined!

 

[kevineugenius]

Like... you can't figure out how spade connectors work...? Might need a little more specificity.

 

[EarthwormJim]

http://www.frozencpu.com/products/i...2mm_-_Silver_Housing_-_Ring_Illumination.html

Use the always off connectors.

 

[Trackr]

That doesn't really help me.

I'm trying to fit this:

Onto this:

 

[Trackr]

Bump

 

[paxious]

Assuming red/black goes to the power led header on your mobo and the two yellow wires go to the power switch header...

black --- "-"
red --- "+"
yellow --- "C"
yellow --- "NO"

 

[Trackr]

Assuming red/black goes to the power led header on your mobo and the two yellow wires go to the power switch header...

black --- "-"
red --- "+"
yellow --- "C"
yellow --- "NO"

Okay, great.

But.. the wires won't stay hooked..

 

[paxious]

If the connector is a little bit loose you can use pliers to lightly crimp it onto the switch.
However, if the connector is really loose and falls right off you may have another problem.
It could be the wrong size connector or improper alignment (yer-doin'-it-wrong).

The red arrows show where you would apply pressure to tighten the connector.

 

[Trackr]

If the connector is a little bit loose you can use pliers to lightly crimp it onto the switch.
However, if the connector is really loose and falls right off you may have another problem.
It could be the wrong size connector or improper alignment (yer-doin'-it-wrong).

The red arrows show where you would apply pressure to tighten the connector.

No, it has to be the right one.. they say so on the site.

I'm just a bit afraid of crimping it too much.

I'll give it a try.