Need Help Editing an Award BIOS

SEALTeamSix

2[H]4U
Joined
Aug 15, 2003
Messages
2,434
So here's the deal - I have an nForce2 Shuttle MN31N microATX board. The BIOS is a nice Award 6.0 setup, but it doesn't have any voltage adjustments, CPU multi selection, or a PCI bus speed selection (lock). Because it's an NF2, it should be able to support all of these features, but for whatever reason Shuttle didn't include them. Here's where you come in...

I am trying to edit the BIOS to include these missing features. Here is the original BIOS from Shuttle.

I have run across a few of utilities made for BIOS modification - ModBIN , CBROM and AwardMOD, and here is a collection of BIOS tools that include them. Please note that for CBROM, the 2.xx versions are newer than the 6.xx versions.

Also, a great source of info and tutorials for a few of the programs listed above can be found here. Also, this site has some promising links...

As you may know, BIOSes are modular, and I believe it might be possible to just add another module to the original BIOS that allows it to do the voltage settings/multiplier settings. Having said all that, I am not a BIOS engineer (not by a long shot - I'm a Psych/Spanish major :p), so any and all help is appreciated. Thanks!

-SEAL
 
It's certainly easy to add modules you've extracted from other rom files with CBROM. But unless there are hooks which the "system" or "extended" modules can call during the BIOS setup, those added modules may not function at all.

If they did, I think you might be able to make the settings or submenus available with MODBIN. Be careful trying different extended modules (often called awardext.rom) with an unmodified system module.

Use the program that executes the BIOS setup from DOS before you try flashing, but don't modify settings; just see if they've become available. The OC settings you're looking for are unlikely to be found in a module you can add without any kind of trouble, I'm afraid. Most likely they will reside in awardext.rom IIRC.
 
trivial said:
It's certainly easy to add modules you've extracted from other rom files with CBROM. But unless there are hooks which the "system" or "extended" modules can call during the BIOS setup, those added modules may not function at all.

If they did, I think you might be able to make the settings or submenus available with MODBIN. Be careful trying different extended modules (often called awardext.rom) with an unmodified system module.

Use the program that executes the BIOS setup from DOS before you try flashing, but don't modify settings; just see if they've become available. The OC settings you're looking for are unlikely to be found in a module you can add without any kind of trouble, I'm afraid. Most likely they will reside in awardext.rom IIRC.

So if you were me, how would you go about adding the settings to the BIOS? Should I edit the system module and then try adding another module? Which one would you use and how should the sytem module be adjusted? Sorry for the newb-ness...

-SEAL
 
Back
Top