SEALTeamSix
2[H]4U
- Joined
- Aug 15, 2003
- Messages
- 2,434
So here's the deal - I have an nForce2 Shuttle MN31N microATX board. The BIOS is a nice Award 6.0 setup, but it doesn't have any voltage adjustments, CPU multi selection, or a PCI bus speed selection (lock). Because it's an NF2, it should be able to support all of these features, but for whatever reason Shuttle didn't include them. Here's where you come in...
I am trying to edit the BIOS to include these missing features. Here is the original BIOS from Shuttle.
I have run across a few of utilities made for BIOS modification - ModBIN , CBROM and AwardMOD, and here is a collection of BIOS tools that include them. Please note that for CBROM, the 2.xx versions are newer than the 6.xx versions.
Also, a great source of info and tutorials for a few of the programs listed above can be found here. Also, this site has some promising links...
As you may know, BIOSes are modular, and I believe it might be possible to just add another module to the original BIOS that allows it to do the voltage settings/multiplier settings. Having said all that, I am not a BIOS engineer (not by a long shot - I'm a Psych/Spanish major
), so any and all help is appreciated. Thanks!
-SEAL
I am trying to edit the BIOS to include these missing features. Here is the original BIOS from Shuttle.
I have run across a few of utilities made for BIOS modification - ModBIN , CBROM and AwardMOD, and here is a collection of BIOS tools that include them. Please note that for CBROM, the 2.xx versions are newer than the 6.xx versions.
Also, a great source of info and tutorials for a few of the programs listed above can be found here. Also, this site has some promising links...
As you may know, BIOSes are modular, and I believe it might be possible to just add another module to the original BIOS that allows it to do the voltage settings/multiplier settings. Having said all that, I am not a BIOS engineer (not by a long shot - I'm a Psych/Spanish major
-SEAL