Need Fan/Cooling Advice Noise!

narsbars

2[H]4U
2FA
Joined
Jan 18, 2006
Messages
3,357
HAF 912 case, AMD 8350, Gigabyte 990fXa-UD3,1000 watt Rosewill pwr. supply, MSI 7850, 32 gig RAM, 1x1.5T WD black and 1x1T WD black RE4, 32 gig, Sandisk SSD for boot accelleration. Hyper 212+ with 2 fans, and a total of 5 case fans, pulling in at the front over the HDs, and pushing out at the top and rear.

I don't OC, I do game for hours and my temps are all great. Here is the problem. The damn thing is noisy!!!!

I have some used Gelid 3 pin fans, and a couple of 4 pin fans in the mix. Since I don't OC but do game I am looking for suggestions for brands of fans, configuration of fans, and even the number of fans, or even H2O. How do I get this thing to shut up and still be safe after three hours of Battlefield?

I am not going with a 500 gig SSD because if I did, I would only keep the extra HDs and it would not reduce my heat load. Please assume that I can handle a screwdriver but feel free to treat me as noise illiterate.
Thanks, all suggestions gratefully listened to.
 
define: "5 case fans"
also: two fans on a 212+ is rather overkill if one doesn't overclock. Heck, even if you do overclock you only need one good fan. Have a 212 evo with a single noctua fan on it and temps are fine.

but it all comes down to reducing the fan count a bit, replacing them with quieter ones and making sure they're all 120mm or larger. You should be able to disable the top fans without any major issues.

The only brand i'm familiar with for good and quiet fans are Noctua but there are other good quiet ones out there, i'm sure others will weigh in with recommendations.
 
I guess those 5 total case fans you mean 2 in front, 2 in top and 1 rear. but you have to tell us what kind of fans are you using, fast TIP, never use Cooler Master sickeflow as intake. at the first moment the fan feel any mesh or dust filter they will start to make high noise, so similar fans will actually work the same, if you wanna silent or low noise operation, then never go with high RPM airflow fan as intake, why I mention Intake? they are the loudest. what fan I recommend for intake? Corsair SP 120 Quiet Edition. those are the best you can find for intake case fans. for exhaust you can use any fan under 1500RPM that will do the job good, also what fan are you using with the Hyper212, you can choose 2 configuration first if you wanna use 2 fans, then use 2 PWM Fans with low fan curve, so they will be reguled with the load and remain still silent, or use the stock fan :D yeah stock fan its great and hell silent, and the stock its more than enough to keep your chip cold, also you will want a side panel intake fan, If i remember correct, the hyper212 on AMD chips work in horizontal position, so it will suck all the heat produced by your card and push throught the heatsink, a sidepanel fan will help to compensate this problem..

remember:

*Static Pressure Optimized Fan for Intake

*Any kind of high airflow fan for exhaust, preferably mid RPM (1350-1500RPM) to keep noise low,
Never use high 1800RPM+ in case fan without any fan controller, for exhaust fan i recommend Cooler Master Sickeflow 2000RPM capped to 1500RPM.

*The more Fans the more noise you will perceive specially if you using Anti-Dust Filter in front/Side.

In my case I use 2x Corsair SP120 as intake at 1000-1300RPM. in the HDD Cage I use 2x Cooler Master SickeFlow at 1500RPM with a 2,3CM betwen the HDD Cage and the Fan I acomplish this using Inverted the Screws from the HDD cage out, so I have just to put the fan over the screw without thight and work fine, nothing between HDD cage and fan = No noise and no air blocked so good air for the case, 1x Rear Corsair AF120 at 1500RPM, Upper side panel Intake Corsair SP140with Dust Filter at 1200RPM, lower side panel Exhaust Fan Corsair AF140 at 1500RPM, and bottom of the case, Corsair SP120 at 1000RPM intake. I do not count TOP fans, but i use Corsair H100i with stock fans as exhaust in Pull. with this configuration and high amount of fans im happy with it, very very low noise, not dead silent, but you can barely hear it with all the things in the room OFF in the nights and the loudest thing are front intake fans due to the mesh + anti-Dust filter, but its good, when my h100i start to ramp up he fans while high load, or intensive games, the loudest thing its the Cooler. so the fans are making a good job keeping all cold and near silent.
 
I am learning already. The HAF came with two fans and the rear was almost DOA, not worth an RMA so I just replaced it with a 120.
I Will toss the CM original fan as I don't care if I have lights, just want some quiet. I don't know if the Gelid 120s I have around have a good rep or not, but I am willing to try the Corsair to keep the noise down.
Using the fan that came with the Hyper 212 and a 2nd bought from CM at the same time. I have a Y connection for the PWM fans on the cooler. The front fan(s) suck in, the smaller one blowing over the HDs, the rear fan is aimed at the rear exhaust fan. The two top fans exhaust.
I thought the top fans were a good idea with a bottom mount pwr. supply but Araxie suggest that they may be unneeded. I don't have filters as I depend on blowing the rig out very regularly.
Really appreciate all the good ideas.
 
The main thing you need to do is get lower speed fans. In all likelihood, you have 1600+ RPM fans, so getting fans that spin at 1200 or lower would quiet things down a lot. A fan controller may also work as well.
 
Back
Top