Need Advice on Nforce 2 mobo.

geekcomputing

[H]ard|Gawd
Joined
Aug 30, 2004
Messages
1,100
hi,

im looking for an nforce 2 mobo w/ mounting holes.

what would be the best nforce2 that would have them???

i dont need raid , soundstorm, or video btw.

any suggestions????

please help.
 
Probably either the Abit NF7-S2 or the Abit AN7. I think the ASUS A7N8X has mounting holes too, but I'd want the 4-pin 12v power connector on any Socket A board I'd get, and ASUS is sadly lacking in this regard.
 
ah... thats a good question.

i guess 1 thread was just nforce specific and the other was any mobo.

i guess i should have done just 1 thread.

but thanks for all the advice people.. i appreciate it.
 
"Probably either the Abit NF7-S2 or the Abit AN7."

what is the difference b/t these boards??

i take it that 12v power connector makes things more stable?

thx,
Geek.
 
Avoid the Abit NF7-S2, it is a crippled version of the popular NF7-S v2.0. The AN7 adds in things like uGuru for monitoring and overclocking, but that's not a very big deal. Consider the NF7-S v2.0. However, some heatsinks requiring those mounting holes may not fit on the NF7-S.

The Asus A7N8X series also has mounting holes.
 
Nothing really, it just has a more stipped-down BIOS compared to the NF7-S v2.0. People mistake the two boards thinking they are the same thing.
 
_Korruption_ said:
Nothing really, it just has a more stipped-down BIOS compared to the NF7-S v2.0. People mistake the two boards thinking they are the same thing.
Yep, that would be correct, since it's a mistake I made in this post. Those names are way too close to each other.

Too bad the MSI K7N2 Delta2 Platinum doesn't have mounting holes...definitely my first choice for a Socket A board.
 
geekcomputing said:
"Probably either the Abit NF7-S2 or the Abit AN7."

what is the difference b/t these boards??

i take it that 12v power connector makes things more stable?

thx,
Geek.
If you get a board without the 12v power connector, CPU power is derived from the 5v rail on the power supply. Most modern ATX power supplies now put more amperage on the 12v rail for CPU power, due to new mainboard designs. The auxiliary 12v connector was designed by Intel to ensure enough power, but has been adopted by most AMD-based systems as well. The ASUS Socket A boards lack this connector; many other Socket A boards that have it will run without it, but will run more stably if you have a power supply that has it. All Athlon64 and Pentium 4 boards have it; many modern (Read: Athlon XP Barton-core supported) Socket A boards have it as well.
 
Back
Top